CDP-XE510 - Sony Audio Service Manual (repair manual). Page 6

— 6 —

The following checks can be performed in the AF mode, which is
set by connecting the TP2 (AFADJ) terminal on MAIN
board to the Ground and turning on the power.

After all segments light up, when the 

· button is pressed, the

following will be displayed. (Partial lighting 1)

When the 

p button is pressed, the following will be displayed.

(partial lighting 2)

The display will light up as follows (partial lighting 3) when the
≠ AMS ± knob is rotated to the right, and as follows (par-
tial lighting 4) when rotated to the left.

CHECK

)

0

P

ENTER

CLEAR

MUSIC SCAN

PEAK SEARCH

EDIT/

TIME FADE

PLAY MODE

REPEAT

TIME

OPEN/

CLOSE 

§

PLAY 

·

STOP 

p

12

13

14

All lit

Partial lighting 1

Partial lighting 2

Button

Button No.

Displayed

0

1

2

4

6

7

9

10

11

Button

Button No.

Displayed

When buttons other than the 

· button are pressed when the

whole display is lit, the display will change to partial lighting 2.
When the “

·” button is pressed, the display will light up as

follows.

REMOCON PLAY

(Partial lighting 5)

When the OPEN/CLOSE 

§ button is pressed, all will light up

again.

All buttons have corresponding button numbers. When a button
is pressed, the counter will count up and display the button’s num-
ber. However, the counter will only count to “15”. It will not count
for buttons already pressed once, but will display the button’s
number.

88

 

TOTAL

= 

88

Â

Â

Display of button number

Display of counting

A B C D E F

(Partial lighting 1)

(Partial lighting 2)

JOG RIGHT

JOG LEFT

(Partial lighting 4)

(Partial lighting 3)