Read Sony CDP-XE210 / CDP-XE310 Service Manual online
— 5 —
SECTION 3
DISASSEMBLY
Note :
Follow the disassembly procedure in the numerical order given.
3-1. FRONT PANEL
• In order to remove the front panel block when the power supply
does not turn on, rotate the cam with tapering driver as the figure
shows, and the loading part will be moved.
Then pull out the loading part by your hand to remove the load-
ing panel as the figure shows. After that take out the front panel
block.
shows, and the loading part will be moved.
Then pull out the loading part by your hand to remove the load-
ing panel as the figure shows. After that take out the front panel
block.
Tapering driver
Loading part
Loading panel
1
Turn the cam to the direction of ar-
row (counter clock wise)
by tapering driver.
row (counter clock wise)
by tapering driver.
BU-5BD20
2
Take off the disc table.
3
Yoke bracket
4
Remove the Base unit
(BU-5BD20) to the direction
of arrow.
(BU-5BD20) to the direction
of arrow.
3-2. BASE UNIT (BU-5BD20)
Click on the first or last page to see other CDP-XE210 / CDP-XE310 service manuals if exist.