CDP-XB930, CDP-XB930E - Sony Audio Service Manual (repair manual). Page 9

9

When the p  button is pressed, the following will be displayed.
(partial lighting 2)

When the OPEN/CLOSE § button is pressed, all will light up
again.

All buttons have corresponding button numbers. When a button
is pressed, the counter will count up and display the button’s
number. However, the counter will only count to “18”. It will
not count for buttons already pressed once, but will display the
button’s number.(Partial lighting 3)

The following checks can be performed in the AF mode, which is
set by connecting the TP51 (AFADJ) terminal on MAIN board to
the Ground and turning on the power.

After all segments light up, when the · button is pressed, the
following will be displayed. (Partial lighting 1)

When the · button of the remote commander is pressed, the
following will be displayed. All go off when the other buttons
are pressed. (Partial lighting 4)

LANGUAGE

MUSIC SCAN

AUTO SPACE

PEAK SEARCH

PLAY MODE

REPEAT

FADER

TIME/TEXT

0

)

0

1

2

3

4

5

6

7

8

9

EDIT/

TIME FADE

CHECK

CLEAR

 P

ENTER

OPEN/CLOSE

   §

PLAY ·

STOP p

10

11

12

18

20

ALL lit

Partial lighting 1

Partial lighting 2

2

4

6

8

10

12

14

16

18

20

(Partial lighting 2)

• Initial setting of digital filter and release of mute.
• When the TP51 (AFADJ) terminal on MAIN board is set to

HIGH (VDD), emphasis turns on. When set to LOW (Ground),
it turns off.

A B C D E F

 (Partial lighting 1)

88 TOTAL  88

Display of 
counting

Display of 
button number 

Â

Â

(Partial lighting 3)

(Partial lighting 4)

When you turn the AMS knob clockwise

JOG RIGHT

JOG LEFT

When you turn the AMS knob counter-clockwise