CDP-SP55, CMT-SP55MD, CMT-SP55TC - Sony Audio Service Manual (repair manual). Page 4

4

This unit cannot be repaired by itself.
When repairing, connect the whole system except for the speaker.

• This unit displays CD text.

Text is displayed for the first 50 track only and will not be displayed from the 51st track onwards. Do not suspect a fault in this case.
In some cases, some special characters will not be displayed and may be replaced by other characters. Do not suspect a fault in this case.

• The cold reset clears all data including preset data stored in the RAM to initial conditions. Execute this mode when returning  the set to the

customer.

Procedure :
1.

When the power ON, press the  ?/1  button (TA) while pressing the  TUNING MODE  button (ST) and  ML buttons (CDP)
together.

2.

“COLD RESET” is displayed on the fluorescent indicator tube and reset is executed.

• This mode reset the preset data kept in the memory. The hot reset mode functions same as if the power cord is plugged in and out.

Procedure :
1.

When the power ON, press the  ?/1  button (TA) while pressing the  TUNING MODE  button (ST) and lm buttons (CDP)
together.

2.

Turn off the unit and reset is executed.

Procedure :
1.

When the power ON, press the  ?/1  button (TA) while pressing the  TUNING MODE button (ST) and PLAY MODE buttons (CDP)
together.

2.

Fluorescent indicator tube are all turned on.

3.

Press  TUNING MODE  button (ST) to enter the model destination indecation mode. “SP55    CE2” appears.

4.

Every pressing of  TUNING MODE  button (ST) changes the display in the following order.
MC Version 

t CD Version t ST Version t TC Version t TA Version t TM Version t model destination display.

5.

Press DISPLAY button (ST) and the date appears as “ 00615a ”
Every pressing of  DISPLAY  button (ST) changes the display in the Version display and model destination display.

6.

Press TUNER/BAND  button (ST) to enter the key check mode.

7.

In the key check mode, the fluorescent indicator tube displays “Key 0 Vol 0”. Each time a button is pressed, “Key” value increases.
However, once a button is pressed, it is no longer taken into account.
“Vol” Value increases like “1, 2, 3 ...” if rotating  VOLUME  knob (TA) in the clockwise direction, or decreases like “0, 9, 8 ...” if rotating
in the counterclockwise diretion.

8.

To exit from this mode, press three buttons in the same procedure as step 1, or disconnect the power cord.