CDP-NW10 - Sony Audio Service Manual (repair manual). Page 6

6

Before connecting each of speaker cables to the Unit, you must
connect them to the supplied speaker connector. See
“Connecting speaker cables to the speaker connector.”

7

Connects speakers in a room using a speaker cable.

9

Connects the DC IN connector using the power supply cables
inserted to connect the AC power unit and a Unit.

You can tune in AM/FM stations using the Unit.

1

Connects the AM loop antenna to the AM terminal.
Connect a 75 ohm coaxial cable (not supplied) from an outdoor
FM antenna (not supplied).

You can connect Units to other Units or computers via a router
or a hub.

2

Connects the Units to a router or a hub using a Ethernet cable.

You can listen to the sound from external audio equipment via
the Unit.

3

Connects the OUTPUT jacks (L/R) of the audio equipment to
the LINE IN (L/R) jacks of the Unit using audio cables (not
supplied).

You can control components with the remote in a wider range
by connecting the Unit and the component to IR IN/OUT.

4

Connect IR IN of the Unit and IR OUT of a component, such as
a TV so that you can operate the Unit with the remote by
aiming it at the TV.

4

Connect IR OUT of the Unit and IR IN of a component, such as
a CD Changer, so that you can operate the DVD Changer with
the remote by aiming it at the Unit.