Read Sony CDP-M400CS Service Manual online
12
CDP-M400CS
3-10. DOOR SW BOARD
5
two screws
(BVTP 2.6
(BVTP 2.6
×
8)
3
screw (PTPWH 2.6
×
8)
1
screw (PTPWH 2.6
×
8)
1
Move the slider (pop-up) and the lever (pu joint) fully
in the direction of the arrow
in the direction of the arrow
A
.
2
Install the gear (cam) in the direction shown
in the illustration and rotate it fully
in the direction of the arrow
in the illustration and rotate it fully
in the direction of the arrow
B
.
3
When the gear (cam) happens to go too deep,
return it to the original position
in the direction of the arrow
return it to the original position
in the direction of the arrow
C
.
4
gear (B)
2
gear (cam)
6
DOOR SW board
C
B
A
lever (pu joint)
two rotary switches
slider (pop-up)
gear (cam)
DOOR SW board
The levers of the two rotary switches on the D. SW board
are shown in the illustration below.
are shown in the illustration below.
Precaution during the gear (cam) installation
Click on the first or last page to see other CDP-M400CS service manuals if exist.