Read Sony CDP-EX880 / CDP-MS717 / DHC-EX880MD / DHC-MD717 Service Manual online
– 4 –
POWER SUPPLY DURING SERVICING
• As this set has not own power supply, it does not operate inde-
pendently.
Therefore, during servicing, connect it to the Pre-Main ampli-
fier Unit (TA-EX880/MS717) of DHC-EX880MD/MD717.
Also, connect the Tuner Unit (ST-EX880/MS717) because the
POWER switch is not provided to the Pre-Main amplifier Unit
(TA-EX880/MS717).
Therefore, during servicing, connect it to the Pre-Main ampli-
fier Unit (TA-EX880/MS717) of DHC-EX880MD/MD717.
Also, connect the Tuner Unit (ST-EX880/MS717) because the
POWER switch is not provided to the Pre-Main amplifier Unit
(TA-EX880/MS717).
If TA-EX880/MS717 and ST-EX880/MS717 are not available,
use the Power Feed Jig (PFJ-1).
In this case, turn on the POWER switch on the Power Feed Jig,
then press
use the Power Feed Jig (PFJ-1).
In this case, turn on the POWER switch on the Power Feed Jig,
then press
[ ]
button and
[CLEAR]
button on the set simulta-
neously, so that the power is supplied.
Connection:
Set
Pre-Main AMP
Unit
(TA-EX880/MS717)
Tuner Unit
(ST-EX880/MS717)
AC plug cord
Connector cable
(attached to the set) (17P)
(attached to the set) (17P)
AC IN jack
SYSTEM CONTROL terminal
SYSTEM CONTROL terminal
SYSTEM CONTROL terminal
AC IN
p
POWER SW
P707, 909
CDP/TC
CDP/TC
Connector cable 17P
CN501 17P
Power feed jig (PFJ-1)
Set
SYSTEM CONTROL
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous ra-
diation exposure.
other than those specified herein may result in hazardous ra-
diation exposure.
This appliance is classified as a CLASS 1 LASER product.
The CLASS 1 LASER PRODUCT MARKING is located on
the rear exterior.
The CLASS 1 LASER PRODUCT MARKING is located on
the rear exterior.
Laser component in this product is capable of emitting radiation
exceeding the limit for Class 1.
exceeding the limit for Class 1.
The following caution label is located inside the unit.
CAUTION
:
INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM.
ADVARSEL :
USYNLIG LASERSTRÅLING VED ÅBNING NÅR
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION. UNDGÅ UDSAETTELSE
FOR STRÅLING.
FOR STRÅLING.
VORSICHT :
UNSICHTBARE LASERSTRAHLUNG, WENN
ABDECKUNG GEÖFFNET UND SICHEREITSVERRIEGELUNG
ÜBERBRÜCKT. NICHT DEM STRAHL AUSSETZEN.
ÜBERBRÜCKT. NICHT DEM STRAHL AUSSETZEN.
VARO
!
:
AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALT-
TIINA NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
VARNING
:
OSYNLING LASERSTRÅLING NÄR DENNA DEL ÄR ÖPPNAD
OCH SPÄRREN ÄR URKOPPLAD. BETRAKTA EJ STRÅLEN.
ADVERSEL :
USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES OG
SIKKERHEDSLÅS BRYTES. UNNGÅ EKSPONERING FOR STRÅLEN.
VIGYAZAT
! :
A BURKOLAT NYITÁSAKOR LÁTHATATLAN LÉZERSU-
GÁRVESZÉLY
! KERÜLJE A BESUGÁRZÁST!
MODEL IDENTIFICATION
– Back Panel –
PART No.
CDP-EX880 : 4-995-118-1
π
CDP-MS717 : 4-995-118-2
π
Click on the first or last page to see other CDP-EX880 / CDP-MS717 / DHC-EX880MD / DHC-MD717 service manuals if exist.