CDP-CX200, CDP-CX205, CDP-CX225 - Sony Audio Service Manual (repair manual). Page 14

— 14 —

SENSOR ALIGNMENT
If the disc table swings to the left and right just before the disc is
chucked, perform the following adjustment.

(1) Rotate the cam and adjust to the position

shown in the figure.

(2) Check that the lever (stopper) assem-

bly secures the disc table as shown in
the figure.

(4) Moving the disc table right and left with a hand after the screw is

fixed, the table will move by the play of a disc table. If the LEDs
light up alternately, the adjustment will be performed correctly)

(3)Loosen the fixed screw by 60

°

 to 90

°

, and use a tapering screwdriver to adjust the screw as shown in the figure.

Move the bracket (sensor) with the tapering screwdriver little by little, and fix the fixed at where the paly botton's LED (green) is switched to
the pause button's LED (orange) (or its reverse).