Read Sony CDP-CE575 Service Manual online
14
CDP-CE575
ADJ MODE
NOTE:
This mode cannot be performed without a general remote com-
mander.
mander.
1. Chuck the CD first, and then turn OFF the power.
2. Short-circuit the test point TP (ADJ) of the MAIN board and
2. Short-circuit the test point TP (ADJ) of the MAIN board and
ground with a lead wire.
3. Press the
[POWER]
button to turn ON the power.
The CD is playback the 2nd track automatically and the ADJ
mode is set.
mode is set.
4. To exit the mode, press the
[POWER]
button to turn OFF the
power.
ADJ Mode Special Function Table
Button
Function
DISC 1
RFDC display
DISC 2
Decision of Disc size (8/12 cm)
DISC 3
Change the slice level
DISC 4
Change the focus bias (high/middle/low)
DISC 5
Track jump (1st
y 20th)
TIME/TEXT
TRK off/on
M
Offset (VC), EF bias display
m
Offset (RF, FE, TRK) display
EX-CHANGE
Focus bias down
DISK SKIP
Focus bias up
X-FADE
Track gain up/down
EDIT
Disc kind (aluminum/RW), side (8/12 cm) display
CHECK
S-curve mode
CLEAR
RFCK
t GFS t error rate display
PEAK SERCH
Best point of focus bias, jitter value display
FADER
Auto gain display
SECTION 5
TEST MODE
FLUORESCENT INDICATOR TUBE, LED ALL LIT,
AND KEY CHECK MODE
AND KEY CHECK MODE
1. Short-circuit the test TP (AFADJ) of the MAIN board and
ground with a lead wire.
2. Press the
[POWER]
button to turn ON the power.
The whole fluorescent indicator tube lights up.
3. All buttons have individual button numbers.
When a button is pressed, the button number is counted up
and displayed.
and displayed.
When remote controller signals are received, “RM
**” will be
displayed.
(
(
** are the numbers corresponding to the remote controller
buttons)
When using the remote controller, switch the
When using the remote controller, switch the
[CD1/2/3]
switch
to CD1.
4. To exit the mode, press the
[POWER]
button to turn OFF the
power.
button number
Displays button number
1
0
Connecting Location:
– MAIN BOARD (Component Side) –
TP (AFADJ)
TP (ADJ)
R301
Click on the first or last page to see other CDP-CE575 service manuals if exist.