CDP-CE545 - Sony Audio Service Manual (repair manual). Page 4

4

This unit is able to display the TEXT data (character information) written in the CD on its fluorescent indicator tube.
The CD-TEXT TEST DISC (TGCS-313:4-989-366-01) is used for checking the display.
To check, perform the following procedure.

1. Set the test disc on a free tray, and chuck the disc.
2. Press the  B  button and play back the disc.
3. The following will be displayed on the fluorescent indicator tube.

Display : 1kHz/0 dB/ L&R

4. Rotate  l AMS L  knob to switch the track. The text data of each track will be displayed.

For details of the displayed contents for each track, refer to “Table 1 : CD-TEXT TEST DISC TEXT Data Contents” and “Table 2 : CD-
TEXT TEST DISC Recorded Contents and Display”.

In this unit, some special characters will not be displayed properly. These will be displayed as a space or a character resembling it. For
details, refer to “Table 2 : CD-TEXT DISC Recorded Contents and Display”.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

TRACK

No.

Displayed Contents

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

TRACK

No.

Displayed Contents

1kHz/0dB/L&R

20Hz/0dB/L&R

40Hz/0dB/L&R

100Hz/0dB/L&R

200Hz/0dB/L&R

500Hz/0dB/L&R

1kHz/0dB/L&R

5kHz/0dB/L&R

7kHz/0dB/L&R

10kHz/0dB/L&R

16kHz/0dB/L&R

18kHz/0dB/L&R

20kHz/0dB/L&R

1kHz/0dB/L&R

1kHz/-1dB/L&R

1kHz/-3dB/L&R

1kHz/-6dB/L&R

1kHz/-10dB/L&R

1kHz/-20dB/L&R

1kHz/-60dB/L&R

1kHz/-80dB/L&R

1kHz/-90dB/L&R

Infinity Zero w/o emphasis//L&R

Infinity Zero with emphasis//L&R

400Hz+7kHz(4:1)/0dB/L&R

400Hz+7kHz(4:1)/-10dB/L&R

19kHz+20kHz(1:1)/0dB/L&R

19kHz+20kHz(1:1)/-10dB/L&R

100Hz/0dB/L*

1kHz/0dB/L*

10kHz/0dB/L*

20kHz/0dB/L*

100Hz/0dB/R*

1kHz/0dB/R*

10kHz/0dB/R*

20kHz/0dB/R*

100Hz  Squer Wave//L&R

1kHz  Squer Wave//L&R

1kHz  w/emphasis/-0.37dB/L&R

5kHz  w/emphasis/-4.53dB/L&R

16kHz  w/emphasis/-9.04dB/L&R

Note : The contents of Track No. 1 to 41 are the same as those of the current TEST DISC-their titles are displayed.

Performed when returning the unit to the customer.
Custom File Erases all custom files and initializes settings.

Procedure:
1. Remove the discs from all trays.
2. While pressing the  DISK SKIP  button and PROGRAM  but-

ton, press the  POWER  button to turn ON the power.

3. “NO DISC” is displayed, indicating that the mode has ended.
Note: “NO DISC” may be displayed even if there are discs on the

trays.