CDP-CA80ES - Sony Audio Service Manual (repair manual). Page 14

Read Sony CDP-CA80ES Service Manual online

— 14 —
SECTION 3
TEST MODE
ADJ MODE
1. Chuck the CD first, and then turn OFF the power.
2. Short-circuit the test point (TP2:ADJ) of the main board and
ground with a lead wire.
3. Press the  
1/u  button to turn ON the power.
The CD is played back automatically and the ADJ mode is set.
4. To exit the mode, press the  
1/u  button to turn OFF the power.
• Prohibits high speed search during accessing
• Ignores even if GFS becomes L
ADJ Mode Special Function Table
Button
Function
3
8
Tracking servo, sled servo OFF
Tracking servo, sled servo ON
FLUORESCENT INDICATOR TUBE, LED ALL LIT,
AND KEY CHECK MODE
1. Short-circuit the test (TP1:AFADJ) of the main board and ground
with a lead wire.
2. Press the  
1/u  button to turn ON the power.
The whole fluorescent indicator tube lights up.
Nothing will be displayed when the SRAM is faulty or improperly
soldered.
3. All buttons have individual button numbers.
When a button is pressed, the button number is counted up and
displayed.
Buttons and Corresponding Button Numbers
Button
Button Number or Display
CONTINUE
SHUFFLE
PROGRAM
REPEAT
TIME/TEXT
DISC CHECK
DISC1
DISC2
DISC3
DISC4
DISC5
( (PLAY)
P (PAUSE)
p (STOP)
EX-CHANGE
DISC SKIP
§ OPEN/CLOSE
AMS 
±
AMS 
1
2
3
4
5
6
7
8
9
10
>10
18
17
16
9
8
30
23
22
21
20
19
Partial lighting 1 (Grid check)
28
Partial lighting 2 (Segment check)
24
25
All lit (LED lighting)
30
31
4
3
2
1
0
15
14
13
12
11
10
When remote controller signals are received, “RM 
**” will be
displayed.
(
** are the numbers corresponding to the remote controller keys.)
When using the remote controller, switch the COMMAND MODE
switch to CD1.
4. To exit the mode, press the  
1/u  button to turn OFF the power.
[MAIN BOARD] – CONDUCTOR SIDE –
Count up display
Displays button number
1
0
IC501
R544
TP2
(ADJ)
TP1
(AFADJ)
Page of 49
Display

Click on the first or last page to see other CDP-CA80ES service manuals if exist.