Read Sony CDP-C591 / CDP-CE235 / CDP-CE335 / SEN-R2900 Service Manual online
— 4 —
HOW TO OPEN THE DISC TRAY WHEN POWER
SWITCH TURNS OFF
SWITCH TURNS OFF
NOTE FOR MAIN GEAR INSTALLATION
IN
OUT
Tray
Insert a tapeing driver into the aperture of the unit bottom,
and turn in the direction of arrow (to OUT direction.)
and turn in the direction of arrow (to OUT direction.)
* To close the disc tray, turn the driver
in the reverse direction(to IN direction).
in the reverse direction(to IN direction).
2
Set the cut-out of the ENCODER
to the right when viewed from the front view.
3
Install the MAIN GEAR while aligning
the protrusion of the MAIN GEAR to
the cut-off of the ENCODER.
the cut-off of the ENCODER.
6
Stopper washer (5)
5
Rotate the MAIN GEAR until the portion
that has no gears, of the MAIN GEAR
is aligned with the shaft of the GEAR (REV).
Then insert the GEAR (REV).
is aligned with the shaft of the GEAR (REV).
Then insert the GEAR (REV).
Projected portion
SHAFT
1
Rotate the GEAR (U/D)
to the arrow
A
direction.
4
Open the SET LEVER and
LOCK LEVER in the direction of
the arrow
the arrow
B
, and push in the MAIN GEAR.
Front view
B
B
A
Click on the first or last page to see other CDP-C591 / CDP-CE235 / CDP-CE335 / SEN-R2900 service manuals if exist.