Read Sony BMZ-K33 / CX-BK33 Service Manual online
5
CX-BK33
PART No.
SECTION 1
SERVICING NOTES
•
MODEL IDENTIFICATION
– Rear Cover –
MODEL
PART No.
Chilean and Peruvian models
4-254-166-1[]
AEP and UK models
4-254-166-2[]
The laser diode in the optical pick-up block may suffer electrostatic
break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pick-
up block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
the disc reflective surface by the objective lens in the optical pick-
up block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
LASER DIODE AND FOCUS SEARCH OPERATION
CHECK
CHECK
Carry out the “S curve check” in “CD section adjustment” and check
that the S curve waveforms is output three times.
that the S curve waveforms is output three times.
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
BLOCK OR BASE UNIT
SERVICE POSITION
– Tape Mechanism Deck –
– Tape Mechanism Deck –
Connect the wire (flat type) (8 core)
to the MAIN board (CN903) and
the mechanism deck.
to the MAIN board (CN903) and
the mechanism deck.
Connect the wire (flat type) (11 core)
to the DECK board (CN008) and the MAIN board (CN009).
to the DECK board (CN008) and the MAIN board (CN009).
Click on the first or last page to see other BMZ-K33 / CX-BK33 service manuals if exist.