Read Sony BDV-IS1000 / HT-IS100 / SA-WIS100 / SS-IS15 Service Manual online
SA-WIS100/SS-IS15
9
five bosses.
grille frame assy
wire (flat type) (17 core)
(CN1351)
top panel block
eight bosses
boss
(for hot melt glue)
boss (for hot melt glue)
Note 1: Please install a top panel block
after remaining hot melt glue is dissolved
in two bosses by the soldering iron heated up
a little when installing a top panel block.
Note 2: Please be careful about a soldering iron
as it isn't rather too lukewarm.
Note 3: Please install it as a gap of a top panel block
and a cabinet will be the numerical value
of the following figure.
D
top panel block
Gap Specification of top panel block and cabinet
A, B, C and D = 0.7 mm ± 0.5
cabinet
(left side)
(left side)
cabinet
(right side)
(right side)
cabinet
(front or
rear side)
(front or
rear side)
A
B
C
screw
(BVTP3
× 8)
Note: Follow the disassembly procedure in the numerical order given.
3-2. TOP PANEL BLOCK
Click on the first or last page to see other BDV-IS1000 / HT-IS100 / SA-WIS100 / SS-IS15 service manuals if exist.