Read Sony BDV-IS1000 / HT-IS100 / SA-WIS100 / SS-IS15 Service Manual online
SA-WIS100/SS-IS15
5
MAIN BOARD SERVICE POSITION (SA-WIS100)
In checking the MAIN board, prepare jig (extension cable J-2501-231-A: 1.00 mm Pitch, 15 cores, Length 300 mm/J-2501-086-A: 1.00 mm
Pitch, 19 cores, Length 300 mm/J-2501-244-A: 1.00 mm Pitch, 21 cores, Length 300 mm).
In checking the MAIN board, prepare jig (extension cable J-2501-231-A: 1.00 mm Pitch, 15 cores, Length 300 mm/J-2501-086-A: 1.00 mm
Pitch, 19 cores, Length 300 mm/J-2501-244-A: 1.00 mm Pitch, 21 cores, Length 300 mm).
Note: Please take out AMP block assy of the set, and connect it with top panel block.
MAIN board
CN010
CN011
CN1005
Connect jig
(extension cable J-2501-244-A)
(extension cable J-2501-244-A)
Connect jig (extension cable J-2501-231-A)
Connect jig (extension cable J-2501-086-A)
top panel block
CONNECT board
ELECTRICAL DISCHARGE PROCESSING (SA-WIS100)
C903
C934
POWER board
800
Ω/2W
800
Ω/2W
red
black
connector
In checking the board, connect
the lead of red and black by
resistance for electric shock
prevention.
the lead of red and black by
resistance for electric shock
prevention.
C903
and
C934
and
C934
In checking the board,
make a capacitor discharge
of C903 and C934 for
electric shock prevention.
make a capacitor discharge
of C903 and C934 for
electric shock prevention.
CN904
Click on the first or last page to see other BDV-IS1000 / HT-IS100 / SA-WIS100 / SS-IS15 service manuals if exist.