Read Sony BDV-HZ970W / BDV-IZ1000W / HBD-HZ970W / HBD-IZ1000W Service Manual online
HBD-HZ970W/IZ1000W
23
9. Factory Initialize (Factory Settings)
Return all of the player setting to their factory defaults.
Return all of the player setting to their factory defaults.
Operation:
Screen 1
Press the [1] button in this screen when restoring the set to its fac-
tory settings.
All saved titles will also be deleted.
[1]
Screen 1
Press the [1] button in this screen when restoring the set to its fac-
tory settings.
All saved titles will also be deleted.
[1]
Start Factory Initialize
[2]
Start Factory Initialize for TV (Not used)
[
M]/[m]
Moves the cursor
[
3
]
Activate the selected cursor
[RETURN] Returns to the top menu of the service mode
Screen 2
It is a screen of the end of initialization.
[RETURN] Returns to the top menu of the service mode
It is a screen of the end of initialization.
[RETURN] Returns to the top menu of the service mode
To complete factory initialize, execute “Reset to Factory Default
Settings” from the OSD menu, next execute COLD RESET.
Please disconnect AC power cord, and connect AC again. Press the
[
Settings” from the OSD menu, next execute COLD RESET.
Please disconnect AC power cord, and connect AC again. Press the
[
?/1
] button to turn power on, and press the [HOME] button, Se-
lect “Setup”
→ “Resetting” → “Reset to Factory Default Settings”
→ “All settings” → “Start” from the OSD menu, and press the [
3
]
button. Then press the [
?/1
] button to turn the power on, and press
the [
x
] and [VOLUME –] buttons on the set simultaneously and
hold down (around 5 seconds) to execute COLD RESET.
Remove the AC power cord and insert the AC power cord again.
* Operations in other service menus can also be performed.
* Operations in other service menus can also be performed.
(Screen 1)
Factory Initialize
[1] Start Initialize
[2] Start Initialize for TV
[2] Start Initialize for TV
(Screen 2)
Factory Initialize
Reboot to complete.
[RET] Return to Top Menu
HELP: [RET]
[RET] Return to Top Menu
10. Network (Network Test Diagnosis Screen: Ifconfi g)
Network menu for the wired ethernet.
Network menu for the wired ethernet.
Screen 1: Ifconfi g Test
Operation:
[
Operation:
[
3
] Activate Ifconfi g (Display network setting)
[
,]
Select ping test
[RETURN] Returns to the top menu of the service mode
Screen 2: Ping Test
Operation:
[
Operation:
[
<
] Select
Ifconfi g test
[RETURN] Returns to the top menu of the service mode
(The details of a Ping test are “11. Network (Network Test Diagno-
sis Screen: Ping)”)
(The details of a Ping test are “11. Network (Network Test Diagno-
sis Screen: Ping)”)
Screen 3: Ifconfi g Test Active
Display Ifconfi g command results.
Operation:
[
Display Ifconfi g command results.
Operation:
[
3
] Ifconfi g retry
[
,] Select
Ping Test
[RETURN] Returns to the top menu of the service mode
Network
Test:
Ifconfig
Ping
HELP : [DOWN][ENT][(NUM)]
(Screen 1)
Network
HELP : [DOWN][ENT][(NUM)]
Network
(Screen 2)
(Screen 3)
Test: Ifconfig
Ping
[START]
Ping To:
Test:
Ifconfig
Ping
IP 192. 168. 11. 2 MAC 00-16-01-85-21-A3
HELP : [ENT]: Re/Exe [RIGHT]
Ver. 1.1
Click on the first or last page to see other BDV-HZ970W / BDV-IZ1000W / HBD-HZ970W / HBD-IZ1000W service manuals if exist.