BDV-EF200, HBD-EF200 - Sony Audio Service Manual (repair manual). Page 25

16. Drive
This menu is used to operate the drive using drive-related diagnos-
tic and tools.

Screen 1: Selecting items under *Drive
Operation:
[

<

]/[

,

]  Selects the category

[

m

]/[

] 

Activate the selected category

[RETURN]  Returns to the top menu of the service mode
[1]  Drive OP data Write
[2]  Servo Parameter Check Menu (Not used)
[3]  Servo Signal Check Menu (Not used)
[4]  S-Curve Check Menu (Not used)
[5]  Readability Check Menu (Not used)
[6]  OP Position Check Menu (Not used)
[7]  OP Check Menu (Not used)
[8]  Load Eject Aging (Not used)
[9]  Spindle Control Check Menu (Not used)
[10] FA Test Mode (Not used)

Screen 2: To start OP data Write
Operation:
[

] Starts

Screen 3: Show OP data Write result
Operation:
NG - USB is not fi nd
NG - File (Butada.txt) is not fi nd
OK - OP data write

• Drive 

Test

For drive operating check. Service is only use Drive OP data write 
to rewrite OP data after change of new CPU.

 Drive

 Drive OP data Write

 Drive OP data Write

J-6090-199-A

BLX-104

Single Layer

J-6090-200-A

BLX-204

Dual Layer

J-2501-307-A

CD (HLX-A1)

J-2501-305-A

HLX-513

Single Layer (NTSC)

J-2501-306-A

HLX-514

Dual Layer (NTSC)

J-6090-077-A

HLX-506

Single Layer (PAL)

J-6090-078-A

HLX-507

Dual Layer (PAL)

Note: Refer to the service manual of BDP-BX1/S350 (Part No. 9-883-

989-1[]) (page 1-3 to 1-14E) for the use of BLX-104/204.

1. BLX-104
Procedure:
1. Select 

23.976Hz/1080p.

2.  Play “4.Motion picture”.
3.  Check whether player can play back or not.
4.  Check each outputs.
 Video:
 Composite/S 

Video/component/HDMI.

 Audio:
 Speaker 

out.

*  When 1080/24p monitor is nothing, 1080i (59.94Hz or 50Hz) 

can use instead of 1080/24p.

 

However this is temporary correspondence.

*  When the output of HDMI is 1080p, the signal of Composite/S 

Video/Component are not output.

 

It is necessary to lower the output of HDMI to 1080i or less.

2. BLX-204
Procedure:
1.  Select 1080i (59.94Hz or 50Hz).
2.  Play “4.Motion picture”.
3.  Check whether player can play back or not.
 

(Check the picture and sound output)

Procedure:
Check whether player can play back or not.
(Check the sound output)

4.  HLX-513/514 (NTSC), HLX-506/507 (PAL)
Procedure:
1.  After displayed Main Menu, select “1.Video Signal”.
2.  Play “1.Color bar 100%”.
 

(Check the picture and sound output)

3.  Return to Menu.
4.  Play “Demonstration 4:3” or “Demonstration 16:9”.
 

(Check the picture and sound output)