Read Sony BDV-E300 / BDV-E801 / BDV-T10 / BDV-T11 / HCD-E300 / HCD-E301 / HCD-E801 / HCD-T10 / HCD-T11 Service Manual online
HCD-E300/E801/T10/T11
2
SAFETY-RELATED COMPONENT WARNING!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
Self-diagnosis Function
When the self-diagnosis function is activated to
prevent the system from malfunctioning, an
error code appears in the front panel display, or
just
prevent the system from malfunctioning, an
error code appears in the front panel display, or
just
appears without any messages on the
entire screen. In these cases, check the
following.
following.
When an error code appears in
the front panel display
the front panel display
When just
appears without
any messages on the entire
screen
screen
Contact your nearest Sony dealer or local
authorized Sony service facility.
authorized Sony service facility.
Error code
Corrective action
Exxxx
Contact your nearest Sony dealer or
local authorized Sony service
facility and give the error code.
local authorized Sony service
facility and give the error code.
SYSTEM ERR
UPDATE NG
Turn off the system and disconnect
the AC power cord (mains lead)
from the wall outlet (mains), then
reconnect and turn the system on. If
the system does not work normally,
consult your nearest Sony dealer or
local authorized Sony service
facility.
the AC power cord (mains lead)
from the wall outlet (mains), then
reconnect and turn the system on. If
the system does not work normally,
consult your nearest Sony dealer or
local authorized Sony service
facility.
(Except HCD-E300: US and Canadian/T10/T11)
Video Section
Outputs
VIDEO: 1 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
P
B
/C
B
, P
R
/C
R
: 0.7 Vp-p
75 ohms
HDMI OUT: Type A (19 pin)
BD/DVD/CD System
Signal format system
NTSC
(HCD-E300: US, Canadian
and Taiwan/T10/T11)
NTSC/PAL
(Except E300: US, Canadian
and Taiwan/T10/T11)
(HCD-E300: US, Canadian
and Taiwan/T10/T11)
NTSC/PAL
(Except E300: US, Canadian
and Taiwan/T10/T11)
Tuner Section (HCD-E300: US and Canadian
/T10/T11)
/T10/T11)
System
PLL quartz-locked digital
synthesizer
synthesizer
FM tuner section
Tuning range
Tuning range
87.5 MHz - 108.0 MHz
(100 kHz step)
(100 kHz step)
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Tuning range
530 kHz - 1,710 kHz (with
the interval set at 10 kHz)
531 kHz - 1,710 kHz (with
the interval set at 9 kHz)
the interval set at 10 kHz)
531 kHz - 1,710 kHz (with
the interval set at 9 kHz)
Antenna (aerial)
AM loop antenna (aerial)
Intermediate frequency
450 kHz
Tuner Section
(Except HCD-E300: US and Canadian/T10/T11)
(Except HCD-E300: US and Canadian/T10/T11)
System
PLL quartz-locked digital
synthesizer
synthesizer
FM tuner section
Tuning range
Tuning range
87.5 MHz - 108.0 MHz
(100 kHz step)
(100 kHz step)
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency
Intermediate frequency
10.7 MHz
Amplifier Section
Stereo mode (rated)
108 W + 108 W (at 3 ohms,
1 kHz, 1% THD)
1 kHz, 1% THD)
Surround mode (reference) RMS output power
Front L/Front R/Center/
Surround L/Surround R*:
143 watts (per channel at 3
ohms, 1 kHz, 10% THD)
Subwoofer*: 285 watts (at
1.5 ohms, 80 Hz, 10% THD)
Surround L/Surround R*:
143 watts (per channel at 3
ohms, 1 kHz, 10% THD)
Subwoofer*: 285 watts (at
1.5 ohms, 80 Hz, 10% THD)
* Depending on the decoding mode settings and the
source, there may be no sound output.
Inputs (Analog)
TV (AUDIO IN)
TV (AUDIO IN)
Sensitivity: 450/250 mV
Impedance: 50 kilohms
Impedance: 50 kilohms
AUDIO (AUDIO IN)
Sensitivity: 450/250 mV
Impedance: 50 kilohms
Impedance: 50 kilohms
Inputs (Digital)
TV (OPTICAL)
TV (OPTICAL)
Impedance: -
SAT/CABLE (COAXIAL)
Impedance: 75 ohms
General
Power consumption
On: 160 W
Standby: 0.3 W (at the Power
Saving mode)
Standby: 0.3 W (at the Power
Saving mode)
Output voltage/current
(DIGITAL MEDIA PORT)
(DIGITAL MEDIA PORT)
DC 5 V/700 mA
LAN (100)
100BASE-TX Terminal
EXT
External memory slot (For
connecting the external
memory)
DC output: 5 V 500 mA Max
connecting the external
memory)
DC output: 5 V 500 mA Max
Dimensions (approx.)
430 mm × 93 mm × 400 mm
(17 in × 3
(17 in × 3
3
/
4
in × 15
3
/
4
(w/h/d) incl. projecting parts
Mass (approx.)
5.4 kg (11 lb 15 oz)
Design and specifications are subject to change without
notice.
notice.
Power requirements
US, Canadian, Mexican
and Taiwan models:
Latin American model:
Other models:
US, Canadian, Mexican
and Taiwan models:
Latin American model:
Other models:
220 V - 240 V AC, 50/60 Hz
120 V AC, 60 Hz
110 V - 240 V AC, 50/60 Hz
110 V - 240 V AC, 50/60 Hz
in)
Ver. 1.1
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-
TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE
PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-
NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-
TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE
PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-
NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
Click on the first or last page to see other BDV-E300 / BDV-E801 / BDV-T10 / BDV-T11 / HCD-E300 / HCD-E301 / HCD-E801 / HCD-T10 / HCD-T11 service manuals if exist.