BDV-E300, BDV-E801, BDV-T10, BDV-T11, HCD-E300, HCD-E301, HCD-E801, HCD-T10, HCD-T11 - Sony Audio Service Manual (repair manual)

bdv-e300, bdv-e801, bdv-t10, bdv-t11, hcd-e300, hcd-e301, hcd-e801, hcd-t10, hcd-t11 service manual
Model
BDV-E300 BDV-E801 BDV-T10 BDV-T11 HCD-E300 HCD-E301 HCD-E801 HCD-T10 HCD-T11
Pages
124
Size
6.24 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
bdv-e300-bdv-e801-bdv-t10-bdv-t11-hcd-e300-hcd-e30.pdf
Date

Read Sony BDV-E300 / BDV-E801 / BDV-T10 / BDV-T11 / HCD-E300 / HCD-E301 / HCD-E801 / HCD-T10 / HCD-T11 Service Manual online

SERVICE MANUAL
Sony Corporation
Audio&Video Business Group
Published by Sony Techno Create Corporation
HCD-E300/E801/T10/T11
SPECIFICATIONS
BD/DVD RECEIVER
9-889-543-02
2009H05-1
© 
2009.08
US Model
HCD-E300/T10/T11
Canadian Model
AEP Model
UK Model
E Model
Australian Model
HCD-E300
Russian Model
HCD-E300/E801
Ver. 1.1  2009.08
•  HCD-E300 is the amplifi er, video, BD/DVD/CD system and tuner section in BDV-E300.
•  HCD-E801 is the amplifi er, video, BD/DVD/CD system and tuner section in BDV-E801.
•  HCD-T10 is the amplifi er, video, BD/DVD/CD system and tuner section in BDV-T10.
•  HCD-T11 is the amplifi er, video, BD/DVD/CD system and tuner section in BDV-T11.
Model Name Using Similar Mechanism
BDP-S350
Mechanism Type
BPD-200
Photo: HCD-E300
•  This product incorporates copyright protection technolo-
gy that is protected by U.S. patents and other intellectual 
property rights.
  Use of this copyright protection technology must be au-
thorized by Macrovision, and is intended for home and 
other limited viewing uses only unless otherwise autho-
rized by Macrovision.
  Reverse engineering or disassembly is prohibited.
•  This system incorporates with Dolby* Digital and Dolby 
Pro Logic (II) adaptive matrix surround decoder and the 
DTS** Digital Surround System.
 
*  Manufactured under license from Dolby Laborato-
ries.
 
 
“Dolby”, “Pro Logic”, and the double-D symbol 
are trademarks of Dolby Laboratories.
 
** Manufactured under license under U.S. Patent 
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 
6,226,616; 6,487,535; 7,392,195; 7,272,567; 
7,333,929; 7,212,872 & other U.S. and worldwide 
patents issued & pending.
 
 
DTS is a registered trademark and the DTS logos, 
Symbol, DTS-HD and DTS-HD Master Audio | Es-
sential are trademarks of DTS, Inc.
 
 
© 1996-2008 DTS, Inc. All Rights Reserved.
• This system incorporates High-Defi nition  Multimedia 
Interface (HDMITM) technology.
  HDMI, the HDMI logo and High-Defi nition  Multime-
dia Interface are trademarks or registered trademarks of 
HDMI Licensing LLC.
•  Java and all Java-based trademarks and logos are trade-
marks or registered trademarks of Sun Microsystems, 
Inc.
•  “BD-Live” and “BonusView” are trademarks of Blu-ray 
Disc Association.
•  “Blu-ray Disc” is a trademark.
•  “Blu-ray Disc,” “DVD+RW,” “DVD-RW,” “DVD+R,” 
“DVD-R,” “DVD VIDEO,” and “CD” logos are trade-
marks.
•  “BRAVIA” is a trademark of Sony Corporation.
•  “AVCHD” and the “AVCHD” logo are trademarks of 
Matsushita Electric Industrial Co., Ltd. and Sony Corpo-
ration.
•  “S-AIR” and its logo are trademarks of Sony Corpora-
tion.
• 
, “XMB,” and “xross media bar” are trademarks of 
Sony Corporation and Sony Computer Entertainment 
Inc.
•  “PLAYSTATION” is a trademark of Sony Computer En-
tertainment Inc.
•   “x.v.Color” and “x.v.Color” logo are trademarks of Sony 
Corporation.
•  “PhotoTV HD” and the “PhotoTV HD” logo are trade-
marks of Sony Corporation.
•  Other system and product names are generally trade-
marks or registered trademarks of the manufacturers. ™ 
and ® marks are not indicated in this document.
Amplifier Section 
(HCD-T10/HCD-T11)
POWER OUTPUT AND TOTAL HARMONIC 
DISTORTION:
(FTC Output Power)
for the US model
Front L/Front R:
With 3 ohms loads, both 
channels driven, from 180 
- 20,000 Hz; rated 56 watts 
per channel minimum 
RMS power, with no more 
than 0.7% total harmonic 
distortion from 250 milli 
watts to rated output.
Surround mode (reference) RMS output power
Front L/Front R/Center/
Surround L/Surround R*: 
133 watts (per channel at 3 
ohms, 1 kHz, 10% THD)
Subwoofer*: 135 watts (at 
1.5 ohms, 80 Hz, 10% 
THD)
* Depending on the decoding mode settings and the 
source, there may be no sound output.
Amplifier Section 
(HCD-E300: US and Canadian models)
POWER OUTPUT AND TOTAL HARMONIC 
DISTORTION:
(FTC Output Power)
for the US model
Front L/Front R:
With 3 ohms loads, both 
channels driven, from 180 
- 20,000 Hz; rated 56 watts 
per channel minimum 
RMS power, with no more 
than 0.7% total harmonic 
distortion from 250 milli 
watts to rated output.
U.S. models:
Surround mode (reference) RMS output power
Front L/Front R/Center/
Surround L/Surround R*: 
143 watts (per channel at 3 
ohms, 1 kHz, 10% THD)
Subwoofer*: 285 watts (at 
1.5 ohms, 80 Hz, 10% 
THD)
Other models:
Stereo mode (rated)
108 W + 108 W (at 3 ohms,
1 kHz, 1% THD)
Surround mode (reference) RMS output power
Front L/Front R/Center/
Surround L/Surround R*: 
143 watts (per channel at 3 
ohms, 1 kHz, 10% THD)
Subwoofer*: 285 watts (at 
1.5 ohms, 80 Hz, 10% 
THD)
* Depending on the decoding mode settings and the 
source, there may be no sound output.
Inputs (Analog)
TV (AUDIO IN)
Sensitivity: 450/250 mV
Impedance: 50 kilohms
AUDIO (AUDIO IN)
Sensitivity: 450/250 mV
Impedance: 50 kilohms
Inputs (Digital)
TV (OPTICAL)
Impedance: -
SAT/CABLE (COAXIAL)
Impedance: 75 ohms
– Continued on next page –
HCD-E300/E801/T10/T11
2
SAFETY-RELATED  COMPONENT  WARNING!
COMPONENTS  IDENTIFIED  BY  MARK  0  OR  DOTTED  LINE  
WITH  MARK  
0  ON  THE  SCHEMATIC  DIAGRAMS  AND  IN  
THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE  OPERATION.
REPLACE  THESE  COMPONENTS  WITH  SONY  PARTS 
 
WHOSE  PART  NUMBERS  APPEAR  AS  SHOWN  IN  THIS  
MANUAL  OR  IN  SUPPLEMENTS  PUBLISHED  BY  SONY.
Self-diagnosis Function 
When the self-diagnosis function is activated to 
prevent the system from malfunctioning, an 
error code appears in the front panel display, or 
just 
 appears without any messages on the 
entire screen. In these cases, check the 
following.
When an error code appears in 
the front panel display
When just 
 appears without 
any messages on the entire 
screen
Contact your nearest Sony dealer or local 
authorized Sony service facility.
Error code
Corrective action
Exxxx
Contact your nearest Sony dealer or 
local authorized Sony service 
facility and give the error code.
SYSTEM ERR
UPDATE NG
Turn off the system and disconnect 
the AC power cord (mains lead) 
from the wall outlet (mains), then 
reconnect and turn the system on. If 
the system does not work normally, 
consult your nearest Sony dealer or 
local authorized Sony service 
facility.
(Except HCD-E300: US and Canadian/T10/T11)
Video Section
Outputs
VIDEO: 1 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
P
B
/C
B
, P
R
/C
R
: 0.7 Vp-p 
75 ohms
HDMI OUT: Type A (19 pin)
BD/DVD/CD System
Signal format system
NTSC
(HCD-E300: US, Canadian 
and Taiwan/T10/T11)
NTSC/PAL
(Except E300: US, Canadian 
and Taiwan/T10/T11)
Tuner Section (HCD-E300: US and Canadian
/T10/T11)
System
PLL quartz-locked digital 
synthesizer
FM tuner section
Tuning range
87.5 MHz - 108.0 MHz 
(100 kHz step)
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
530 kHz - 1,710 kHz (with 
the interval set at 10 kHz)
531 kHz - 1,710 kHz (with 
the interval set at 9 kHz)
Antenna (aerial)
AM loop antenna (aerial)
Intermediate frequency
450 kHz
Tuner Section 
(Except HCD-E300: US and Canadian/T10/T11)
System
PLL quartz-locked digital 
synthesizer
FM tuner section
Tuning range
87.5 MHz - 108.0 MHz 
(100 kHz step)
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
Amplifier Section 
Stereo mode (rated)
108 W + 108 W (at 3 ohms,
1 kHz, 1% THD)
Surround mode (reference) RMS output power
Front L/Front R/Center/
Surround L/Surround R*: 
143 watts (per channel at 3 
ohms, 1 kHz, 10% THD)
Subwoofer*: 285 watts (at 
1.5 ohms, 80 Hz, 10% THD)
* Depending on the decoding mode settings and the 
source, there may be no sound output.
Inputs (Analog)
TV (AUDIO IN)
Sensitivity: 450/250 mV
Impedance: 50 kilohms
AUDIO (AUDIO IN)
Sensitivity: 450/250 mV
Impedance: 50 kilohms
Inputs (Digital)
TV (OPTICAL)
Impedance: -
SAT/CABLE (COAXIAL)
Impedance: 75 ohms
General
Power consumption
On: 160 W
Standby: 0.3 W (at the Power 
Saving mode) 
Output voltage/current 
(DIGITAL MEDIA PORT)
DC 5 V/700 mA
LAN (100)
100BASE-TX Terminal
EXT 
External memory slot (For 
connecting the external 
memory)
DC output: 5 V 500 mA Max
Dimensions (approx.)
430 mm × 93 mm × 400 mm 
(17 in × 3 
3
/
4
 in × 15 
3
/
4
(w/h/d) incl. projecting parts
Mass (approx.)
5.4 kg (11 lb 15 oz)
Design and specifications are subject to change without 
notice.
Power requirements
US, Canadian, Mexican 
and Taiwan models: 
Latin American model: 
Other models: 
220 V - 240 V AC, 50/60 Hz
120 V AC, 60 Hz
110 V - 240 V AC, 50/60 Hz
 in) 
Ver. 1.1
ATTENTION  AU  COMPOSANT  AYANT  RAPPORT  
À  LA  SÉCURITÉ!
LES  COMPOSANTS  IDENTIFIÉS  PAR  UNE  MARQUE  0  SUR  
LES  DIAGRAMMES  SCHÉMATIQUES  ET  LA  LISTE  DES  
PIÈCES  SONT  CRITIQUES  POUR  LA  SÉCURITÉ  DE  FONC-
TIONNEMENT.  NE  REMPLACER  CES  COMPOSANTS  QUE  
PAR  DES  PIÈCES  SONY  DONT  LES  NUMÉROS  SONT  DON-
NÉS  DANS  CE  MANUEL  OU  DANS  LES  SUPPLÉMENTS  
PUBLIÉS  PAR  SONY.
HCD-E300/E801/T10/T11
3
NOTES  ON  CHIP  COMPONENT  REPLACEMENT
• 
Never reuse a disconnected chip component.
• 
Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
FLEXIBLE  CIRCUIT  BOARD  REPAIRING
• 
Keep the temperature of soldering iron around 270 °C during 
repairing.
• 
Do not touch the soldering iron on the same conductor of the 
circuit board (within 3 times).
• 
Be careful not to apply force on the conductor when soldering 
or unsoldering.
SAFETY  CHECK-OUT
After correcting the original service problem, perform the follow-
ing safety check before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs, 
screws, and all other exposed metal parts for AC leakage.
Check leakage as described below.
LEAKAGE  TEST
The AC leakage from any exposed metal part to earth ground and 
from all exposed metal parts to any exposed metal part having a 
return to chassis, must not exceed 0.5 mA (500 microamperes.). 
Leakage current can be measured by any one of three methods.
1.  A commercial leakage tester, such as the Simpson 229 or RCA 
WT-540A. Follow the manufacturers’ instructions to use these 
instruments.
2.  A battery-operated AC milliammeter. The Data Precision 245 
digital multimeter is suitable for this job.
3.  Measuring the voltage drop across a resistor by means of a 
VOM or battery-operated AC voltmeter. The “limit” indication 
is 0.75 V, so analog meters must have an accurate low-voltage 
scale. The Simpson 250 and Sanwa SH-63Trd are examples 
of a passive VOM that is suitable. Nearly all battery operated 
digital multimeters that have a 2 V AC range are suitable. (See 
Fig. A)
1.5 k
Ω
0.15 
μF
AC
voltmeter
(0.75 V)
To Exposed Metal
Parts on Set
Earth Ground
Fig. A.  Using an AC voltmeter to check AC leakage.
This appliance is 
classified as a CLASS 1 
LASER product. This 
marking is located on the 
rear exterior.
CAUTION
Use of controls or adjustments or performance of procedures 
other than those specifi ed herein may result in hazardous radia-
tion exposure.
HCD-E300/E801/T10/T11
4
1. 
SERVICING  NOTES
  .............................................   5
2. DISASSEMBLY
2-1.   Disassembly Flow ...........................................................   9
2-2. Case 
.................................................................................  10
2-3. Front 
Panel 
Assy 
.............................................................  10
2-4.  BD Drive (BPD-200) ......................................................   11
2-5. VIDEO 
Board 
.................................................................  12
2-6. MB-124 
Board 
................................................................  12
2-7. DSP 
Board.......................................................................  13
2-8. MAIN 
Board 
...................................................................  13
2-9. CONNECT 
Board 
...........................................................  14
2-10. POWER Board ................................................................   14
3. 
TEST  MODE 
 ............................................................   15
4. 
ELECTRICAL  CHECK 
 .........................................   22
5. DIAGRAMS
5-1.  Block Diagram - BD Section - ........................................   23
5-2.  Block Diagram - INPUT/OUTPUT Section - .................   24
5-3.  Block Diagram - DSP Section - ......................................   25
5-4.  Block Diagram - AMP Section - .....................................   26
5-5.  Block Diagram - REGULATOR Section - ......................   27
5-6. Block 
Diagram 
 
- PANEL, POWER SUPPLY Section - ...........................   28
5-7. Printed 
Wiring 
Board 
 
- MB-124 Board (Component Side) - .............................   30
5-8. Printed 
Wiring 
Board 
 
- MB-124 Board (Conductor Side) - ...............................   31
5-9.  Schematic Diagram - MB-124 Board (1/10) - ................   32
5-10.  Schematic Diagram - MB-124 Board (2/10) - ................   33
5-11.  Schematic Diagram - MB-124 Board (3/10) - ................   34
5-12.  Schematic Diagram - MB-124 Board (4/10) - ................   35
5-13.  Schematic Diagram - MB-124 Board (5/10) - ................   36
5-14.  Schematic Diagram - MB-124 Board (6/10) - ................   37
5-15.  Schematic Diagram - MB-124 Board (7/10) - ................   38
5-16.  Schematic Diagram - MB-124 Board (8/10) - ................   39
TABLE  OF  CONTENTS
5-17.  Schematic Diagram - MB-124 Board (9/10) - ................   40
5-18.  Schematic Diagram - MB-124 Board (10/10) - ..............   41
5-19.  Printed Wiring Board - AUDIO Board - .........................   42
5-20.  Schematic Diagram - AUDIO Board - ............................   43
5-21.  Printed Wiring Board - VIDEO Board - .........................   44
5-22.  Schematic Diagram - VIDEO Board - ............................   45
5-23. Printed Wiring Board 
 
- MAIN Board (Component Side) - ................................   46
5-24. Printed Wiring Board 
 
- MAIN Board (Conductor Side) - ..................................   47
5-25.  Schematic Diagram - MAIN Board (1/8) - .....................   48
5-26.  Schematic Diagram - MAIN Board (2/8) - .....................   49
5-27.  Schematic Diagram - MAIN Board (3/8) - .....................   50
5-28.  Schematic Diagram - MAIN Board (4/8) - .....................   51
5-29.  Schematic Diagram - MAIN Board (5/8) - .....................   52
5-30.  Schematic Diagram - MAIN Board (6/8) - .....................   53
5-31.  Schematic Diagram - MAIN Board (7/8) - .....................   54
5-32.  Schematic Diagram - MAIN Board (8/8) - .....................   55
5-33.  Printed Wiring Board - DSP Board - ..............................   56
5-34.  Schematic Diagram - DSP Board - .................................   57
5-35. Printed Wiring Boards 
 
- KEY, S-AIR, REGULATOR Section - .........................   58
5-36. Schematic Diagram 
 
- KEY, S-AIR, REGULATOR Section - .........................   59
5-37.  Printed Wiring Board - FL Board - .................................   60
5-38.  Schematic Diagram - FL Board - ....................................   61
5-39.  Printed Wiring Board - POWER Board - ........................   62
5-40.  Schematic Diagram - POWER Board - ..........................   63
6. 
EXPLODED  VIEWS
6-1.  Case, Front Panel, BD Drive Section .............................   96
6-2.  MB-124 Board Section ...................................................   97
6-3.  MAIN Board Section ......................................................   98
7. 
ELECTRICAL  PARTS  LIST
  ..............................   99
Accessories are given in the last of the electrical parts list.
Page of 124
Display

Download Sony BDV-E300 / BDV-E801 / BDV-T10 / BDV-T11 / HCD-E300 / HCD-E301 / HCD-E801 / HCD-T10 / HCD-T11 Service Manual (Repair Manual)

Here you can read online and download Sony BDV-E300 / BDV-E801 / BDV-T10 / BDV-T11 / HCD-E300 / HCD-E301 / HCD-E801 / HCD-T10 / HCD-T11 Service Manual in PDF. BDV-E300 / BDV-E801 / BDV-T10 / BDV-T11 / HCD-E300 / HCD-E301 / HCD-E801 / HCD-T10 / HCD-T11 service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony BDV-E300 / BDV-E801 / BDV-T10 / BDV-T11 / HCD-E300 / HCD-E301 / HCD-E801 / HCD-T10 / HCD-T11 Audio. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.