Read Sony BDV-B1 / SA-WSB1 Service Manual online
12
SA-WSB1
SECTION 5
ELECTRICAL PARTS LIST
9-885-160-26 AMP BOARD, COMPLETE
********************
< IC >
WIC103 9-885-162-31 S/W, SYSTEM PROGRAM
WIC601 9-885-160-07 IC, PWM CONTROLLER
WIC602 9-885-160-08 IC,
WIC601 9-885-160-07 IC, PWM CONTROLLER
WIC602 9-885-160-08 IC,
POWER
AMPLIFIER
*************************************************************
9-885-160-21 SMPS BOARD, COMPLETE
*********************
< CONNECTOR >
CN901
9-885-159-85 HARNESS, SINGLE (12 pin)
< IC >
IC901
9-885-160-06 IC, PWM CONTROLLER
< VARISTOR >
VR901 9-885-160-01 VARISTOR
*************************************************************
*************************************************************
9-885-160-27 SW BOARD, COMPLETE
*******************
< CONNECTOR >
WCN106 9-885-159-86 HARNESS, SINGLE (2 pin)
*************************************************************
*************************************************************
MISCELLANEOUS
**************
FFC51
9-885-159-77 CABLE, FFC (26 pin/50 mm)
0 PW2
9-885-160-00 POWER CORD
SA1
9-885-162-35 SPEAKER
ASSEMBLY
WLS2
9-885-160-10 MODULE, ASSEMBLY (WIRELESS MODULE)
Ref. No.
Part No.
Description
Remark
When indicating parts by reference num-
ber, please include the board name.
ber, please include the board name.
Note:
• Due to standardization, replacements in
• Due to standardization, replacements in
the parts list may be different from the
parts specifi ed in the diagrams or the com-
ponents used on the set.
parts specifi ed in the diagrams or the com-
ponents used on the set.
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
original one.
• Items marked “*” are not stocked since
they are seldom required for routine ser-
vice. Some delay should be anticipated
when ordering these items.
vice. Some delay should be anticipated
when ordering these items.
• RESISTORS
All resistors are in ohms.
METAL:
All resistors are in ohms.
METAL:
Metal-fi lm resistor.
METAL OXIDE: Metal oxide-fi lm resistor.
F:
F:
nonfl ammable
• CAPACITORS
uF:
uF:
μF
• COILS
uH:
uH:
μH
• SEMICONDUCTORS
In each case, u: μ, for example:
uA.
In each case, u: μ, for example:
uA.
. :
μA. . , uPA. . , μPA. . ,
uPB.
.
:
μPB. . , uPC. . , μPC. . ,
uPD.
.
:
μPD. .
Note: As for parts described in this ELECTRICAL PARTS LIST, the
exchange with single part is possible. When parts other than
these are damaged, exchange the complete mounted board.
these are damaged, exchange the complete mounted board.
AMP
SW
SMPS
The components identifi ed by mark
0
or dotted line with mark
0 are critical for
safety.
Replace only with part number specifi ed.
Replace only with part number specifi ed.
Click on the first or last page to see other BDV-B1 / SA-WSB1 service manuals if exist.