Read Sony AIR-RM10 Service Manual online
AIR-RM10
5
SECTION 3
TEST MODE
FACTORY SETTING
Procedure:
1. Press the [
Procedure:
1. Press the [
?/1
] button to turn the power on.
2. Press three buttons of the [
N
], [
X
], and [
?/1
] simultaneously.
3. The message “INITIALIZE?” is displayed on the liquid crystal
display, and press the [VOLUME –] button.
4. The main power is turned off, and the data of the built-in data
fl ash memory is initialized.
5. Press the [
?/1
] button to turn the power on.
PANEL TEST MODE
Procedure:
1. Press the [
Procedure:
1. Press the [
?/1
] button to turn the power on.
2. Press three buttons of the [COUPLING], [PAIRING], and
[
N
] simultaneously.
3. Then all segments of liquid crystal display are turned on. The
display changes in order of the all segments of are turned on
→ test pattern 1 → test pattern 2 → all segments of are turned
on... whenever the [
on... whenever the [
x
] button is pressed.
4. Press the [PRESET –] button, the version of the micro control-
ler is displayed on the liquid crystal display.
5. Press the [
N
] button, the message “Key test 0” is displayed
on the liquid crystal display. When all buttons are pressed, the
message “Key test 13 OK” is displayed on the liquid crystal
display.
message “Key test 13 OK” is displayed on the liquid crystal
display.
6. To exit from this mode, press three buttons of the [COUPLING],
[PAIRING], and [
N
] simultaneously.
Click on the first or last page to see other AIR-RM10 service manuals if exist.