Read Sharp VC-MH835 (serv.man21) User Guide / Operation Manual online
32
www.sharp.co.uk/support
OTHER FEATURES ON YOUR VCR
POST CODE SECURITY
This feature should allow the Police to identify you as the owner of the VCR if it is stolen. Each
time the VCR is turned on your postcode will be displayed for 5 seconds. Your postcode
cannot be changed or removed without first entering the correct PIN - number.
time the VCR is turned on your postcode will be displayed for 5 seconds. Your postcode
cannot be changed or removed without first entering the correct PIN - number.
If you wish to use this function, follow the procedure below.
1.
Press the
MENU
button.
2.
Press the [
/
] menu select buttons to
select SET UP. Press the
SET
button to
confirm.
3.
Press [
/
] to select POST CODE. Press the
SET
button to confirm.
4.
Enter your desired PIN number using the
NUMBER BUTTONS
or the [
/
]
menu select buttons. This must be a 4 digit
number in the range 0000 - 9999.
5.
To enter your postcode use the [
/
]
buttons to scroll through the characters and
the [
/
]buttons to move to the next
position. Press the
SET
button to confirm,
then press the
MENU
button to return to
a normal screen..
6.
Write your PIN number in the box provided
for future reference.
IMPORTANT:- Please keep your Operation Manual separate from your VCR.
If you wish to change your PIN number at any time:
1.
Follow steps 1 to 3 above.
2.
Enter your current PIN number. Press the
SET
button to confirm
3.
Press
to re-select PIN number.
4.
Enter your new PIN number. Press the
SET
button to confirm, then press the
MENU
button to return to a normal screen.
NOTE:
•
Your Postcode can be changed at any time, but you must first enter your correct PIN
number. If the wrong PIN number is entered, an ERROR message will appear. Re-enter
the correct number.
number. If the wrong PIN number is entered, an ERROR message will appear. Re-enter
the correct number.
POS T COD E
P I N NUMB E R
POS T COD E
- - - - - - - - - - -
S E L E C T :
CHANGE
E N T E R : S E T E X I T : ME NU
SET
SET
SET
SET
SET
TINS-A082UMN1.book Page 32 Monday, November 4, 2002 2:33 PM
33
www.sharp.co.uk/support
OTHER FEATURES ON YOUR VCR
CHILD LOCK
You can lock your VCR with this feature. It will work even when the VCR is in STANDBY,
preventing children from operating the VCR.
TO ENGAGE CHILD LOCK
Press and hold the
CHILD LOCK
button on the remote control for about 2 seconds.
flashes and then
remains lit on the VCR display confirming that CHILD LOCK
has been activated.
Regardless of what other operating buttons are touched, the VCR will continue to operate in
its present mode. If CHILD LOCK is activated during playback, once the tape reaches its end,
the VCR will automatically rewind the tape, eject it, and turn the power off.
TO DISENGAGE CHILD LOCK
Press and hold the
CHILD LOCK
button for about 2 seconds.
starts flashing and then disappears. CHILD LOCK is disengaged.
NOTES:
•
If you attempt to change modes by pressing another button while CHILD LOCK is on,
the
indicator will flash on the VCR display.
•
If power is interrupted for more than 60 seconds (due to power failure etc), CHILD LOCK
may disengage.
TINS-A082UMN1.book Page 33 Monday, November 4, 2002 2:33 PM
Display
