VC-MH814. Specifications - Sharp VCR Specification (repair manual)

vc-mh814 specification
Model
VC-MH814
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
320.38 KB
Type
PDF
Document
Specification
Brand
Device
VCR / Specifications
File
vc-mh814.pdf
Date

Read Sharp VC-MH814 Specification online

3
SPECIFICATIONS
Format: VHS PAL standard
Video recording system: Four rotary heads, helical scan system
Video signal: PAL colour and I signals, 625 lines
Recording/playing time: 240 min max. with an E-240 tape SP
480 min max. with an E-240 tape LP
720 min max. with SHARP E-240 Tape( EP)
Tape width: 12.7mm
Tape speed: 23.39 mm/s SP
11.70 mm/s LP
7.8 mm/s EP
Antenna: 75 ohm unbalanced
Receiving channel: UHF Channel E21-E69;
VHF Channel A
~
J,S1-S41 (VC-MH714/704LM only)
RF converter output signal: UHF Channel E21-E69 (Preset to CH E36)
Power requirement: AC230V-240V, 50Hz
                   Power consumption: Approx. 15W (AC230V/50Hz) and 2.5W stand-by mode
Operating temperature: 5
°C to 40°C
Storage temperature: –20
°C to 55°C
Weight: Approx. 4 kg
Dimensions:
430 mm (W) x 281 mm (D) x 92 mm(H)(VC-MH814HM/LM)
360 mm (W) x 289 mm (D) x 93 mm(H)(VC-MH704HM/LM714HM)
VIDEO
Input: 1.0 Vp-p, 75 ohm
Output: 1.0 Vp-p, 75 ohm
S/N ratio: 48 dB (SP mode)
Horizontal resolution: Approx. 260 lines (SP mode with Super Picture)
AUDIO 0 dBs = 0.775 Vrms
Input: Line1: –3.8 dBs, 10k ohm
Line2: –3.8 dBs, 10k ohm
Line3: –3.8 dBs, 10k ohm
Output: Line1: –3.8 dBs, 1k ohm
Line2: –3.8 dBs, 1k ohm
                                REAR RCA:  - 3.8dBs, 1k ohm
S/N ratio: 46 dB min. (SP mode)
 Frequency response: 80 Hz ~ 10 kHz (SP mode)
80 Hz ~   5 kHz (LP mode)
80 Hz ~   3 kHz (EP mode)
Hi-Fi dynamic range: 85dB TYP
HI-FI WOW and flutter: 0.005% Max
Hi-Fi Frequency responce: 20Hz - 20kHz
Hi-Fi Distortion: 0.5% Max
Hi-Fi closs talk (at 1kHz): 55 dB min.
Accessories included: 75 ohm coaxial cable
Operation manual
Infrared remote control
Batteries
As part of our policy of continuous improvement, we reserve
the right to alter design and specifications without notice.
Note:
The antenna must correspond to the new standard DIN 45325
(IEC 169 - 2) for combined UHF/VHF antenna with 75 ohm connector.
VC-MH814HM ETc 1-4
12/7/01, 11:15 am
3
Display

Download Sharp VC-MH814 Specification

Here you can read online and download Sharp VC-MH814 Specification in PDF. VC-MH814 specification will guide through the process and help you recover, restore, fix, disassemble and repair Sharp VC-MH814 VCR. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.