VC-MH732HM. Specifications - Sharp VCR Specification (repair manual)

vc-mh732hm specification
Model
VC-MH732HM
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
4.93 KB
Type
PDF
Document
Specification
Brand
Device
VCR / Specifications
File
vc-mh732hm.pdf
Date

Read Sharp VC-MH732HM Specification online

3
VC-M522HM
VC-MH722HM
VC-MH732HM
1. SPECIFICATIONS
Format: VHS PAL standard
Video recording system: Two rotary heads, helical scan system
Video signal: PAL colour and I signals, 625 lines
Recording/playing time: 240 min max. with SHARP E-240 tape (PAL SP)
480 min max. with an E-240 tape (LP)
Tape width: 12.7mm
Tape speed: 23.39 mm/s (PAL SP)
11.70 mm/s (PAL LP)
Antenna: 75 ohm unbalanced
Receiving channel: UHF Channel E21-E69
RF converter output signal: UHF Channel E21-E69 (Preset to CH E36)
Power requirement: AC230V ~ 240V, 50Hz
Power consumption: Approx. 17W (AC230V/50Hz) and 1W max. at Low power mode
(VC-M522HM)
Approx. 19W (AC230V/50Hz) and 1W max. at Low power mode
(VC-MH722HM/MH732HM)
Operating temperature: 5
°
C to 40
°
C
Storage temperature: –20
°
C to 60
°
C
Weight: Approx. 3.8 kg (VC-M522HM) / 4 kg (VC-MH722HM/MH732HM)
Dimensions: 430 mm (W) x 284 mm (D) x 92 mm (H)
(15-30/32" x 11-1/16" x 3-25/32")
VIDEO
Input: 1.0 Vp-p, 75 ohm
Output: 1.0 Vp-p, 75 ohm
S/N ratio: 45 dB (SP)
Horizontal resolution: 260 lines (SP mode with Super Picture)
AUDIO 0 dBs = 0.775 Vrms
Input: Line1: -3.8 dBs, 10k ohm
Line 2:-3.8 dBs, 10k ohm
Line 3:-3.8 dBs, 47k ohm
Output: Line1: -3.8 dBs, 1k ohm
Line 2:-3.8dBs, 1k ohm
REAR RCA: -3.8dBs, 1k ohm (VC-MH722HM/MH732HM)
S/N ratio: 46 dB
Frequency responce: 80 Hz ~ 10 kHz (SP mode)
80HZ ~ 5Hz (LP mode)
Hi-Fi Dynamic Range: 90 dB TYP (VC-MH722HM/MH732HM)
Hi-Fi Wow and Flutter: 0.005% (VC-MH722HM/MH732HM)
Hi-Fi Frequency Responce: 20 Hz ~ 20 k Hz (VC-MH722HM/MH732HM)
Hi-Fi Distortion: 0.5% max. (VC-MH722HM/MH732HM)
Hi-Fi Crosstalk (at 1kHz): 55 dB min. (VC-MH722HM/MH732HM)
Accessories included: 75 ohm coaxial cable
Operation manual
Infrared remote control
Battery
                                         Note: The antenna must correspond to the new standard DIN 45325
(IEC 169 - 2) for combined UHF/VHF antenna with 75 ohm connector.
As part of our policy of continuous improvement, we reserve the
right to alter design and specifications without notice.
Display

Download Sharp VC-MH732HM Specification

Here you can read online and download Sharp VC-MH732HM Specification in PDF. VC-MH732HM specification will guide through the process and help you recover, restore, fix, disassemble and repair Sharp VC-MH732HM VCR. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.