VC-MH732HM (serv.man5). Part 4 - Mechanical adjustments and assemblies (9-27) - Sharp VCR Service Manual (repair manual). Page 15

1. Assemble the pinch roller assembly and pinch drive

cam.

2. Mounting the shifter (on the back of the mechanism

chassis).

3. Mounting the master cam (on the back of the mecha-

nism chassis).

4. Assemble the connection gear, slow brake and loading

motor parts.

(Place the following parts in position in numerical order.)
(1)Reverse drive lever 

1

(2)Reverse guide spring 

2

(3)Reverse guide lever ass’y 

3

(4)Reverse guide height adjusting nut 

4

(5)Pinch drive cam 

5

(6)Pinch roller ass’y 

6

(7)Open lever 

7

• Replacement (Perform in the numerical order)

1

Remove the motor as stated in Page 22 D.D. motor
replacement.

2

Remove the drum earth brush ass’y 

2

.

3

Remove the drum base 

3

 from the upper and lower

drum assembly 

1

.

[Cares when replacing the drum]
1. Be careful so that the drum earth brush is not lost.
2. Do not touch directly the drum surface.
3. Fit gently the screwdriver to the screws.
4. Since the drum assembly is an extremely precise as-

sembly, it must be handled with utmost care.

5. Make sure that the drum surface is free from dust, dirt

and foreign substances.

6. After replacing the drum  be sure to perform the tape

running adjustment.
After that, perform also the electrical adjustment.
• Playback switching point adjustment
• X-position adjustment and check
• Standard and x-3 slow tracking adjustment

7. After replacing the drum clean the drum.

7

4

3

2

6

1

5

2

1

3