Read Sharp VC-MH731HM (serv.man10) User Guide / Operation Manual online
41
CONNECTING TO THE MAINS
TO REPLACE THE MAINS PLUG:
If the plug fitted is unsuitable for the mains socket in your home, cut off the plug, remove the
fuse and dispose of the cut-off plug safely.
If the plug fitted is unsuitable for the mains socket in your home, cut off the plug, remove the
fuse and dispose of the cut-off plug safely.
Severe electric shock may occur if you connect the cut-off plug to a
mains socket. If a new plug is fitted, observe the wiring code supplied
by the plug manufacturer (and given below.) If you have any doubt,
consult a qualified electrician.
mains socket. If a new plug is fitted, observe the wiring code supplied
by the plug manufacturer (and given below.) If you have any doubt,
consult a qualified electrician.
The wires in the mains cable are colour coded as follows: blue = neutral, brown = live.
As the colours of the wires may not correspond with the terminals in your plug, connect the
wires following plug manufacturer's guide:
As the colours of the wires may not correspond with the terminals in your plug, connect the
wires following plug manufacturer's guide:
●
blue wire to the terminal marked N or coloured black or blue.
●
brown wire to the terminal marked L or coloured red or brown.
Ensure neither the brown nor the blue wire is connected to the earth
terminal in your plug.
Do not allow water to come into contact with the power supply cord or
plug.
A damaged power supply cord or loose plug may cause electric shock.
Contact your SHARP dealer or a qualified electrician. Do not use the
Contact your SHARP dealer or a qualified electrician. Do not use the
VCR.
This VCR is suitable only for connection to
UK mains. The unit is fitted with a moulded
3-pin mains plug with a 3-amp fuse. The
VCR does not have a mains power switch.
When connected to the mains, the unit will
draw current at all times to power the clock.
Be sure to unplug the VCR when it is not to
be used for several months.
UK mains. The unit is fitted with a moulded
3-pin mains plug with a 3-amp fuse. The
VCR does not have a mains power switch.
When connected to the mains, the unit will
draw current at all times to power the clock.
Be sure to unplug the VCR when it is not to
be used for several months.
Never connect the plug to the
mains without the fuse cover
fitted.
mains without the fuse cover
fitted.
TO REPLACE THE FUSE:
You must use a 3-amp fuse, marked (ASTA) or (BSI) to BS-1362. Remove the
fuse cover as shown. Replace the fuse and re-fit the fuse cover securely into the plug.
You must use a 3-amp fuse, marked (ASTA) or (BSI) to BS-1362. Remove the
fuse cover as shown. Replace the fuse and re-fit the fuse cover securely into the plug.
ASA
vc-m331/mh731hm 3/2/99 1:35 pm Page 45
Click on the first or last page to see other VC-MH731HM (serv.man10) service manuals if exist.