VC-MH713 (serv.man12). Operation Manual - Sharp VCR User Guide / Operation Manual. Page 21

18

Stereo sound is possible from this VCR if you have a stereo TV connected to the VCR with a 

scart lead, or audio equipment connected with audio phono leads. The VCR is normally set 

so that stereo sound is possible. The sound output from the VCR is controlled by the 

 button on the remote control. If you wish to change the sound output 

you can use the 

 button as follows:

•

Press the 

 button once. The LEFT audio channel will be sent to BOTH 

speakers.

 will appear on the VCR display.

•

Press the 

 button

twice. The RIGHT audio channel will be sent to BOTH 

speakers.

will appear on the VCR display.

•

Press the 

 button three times. The MONO track will be sent to BOTH 

speakers. 

 and 

 will disappear from the VCR display. 

•

Pressing the 

 button a fourth time, normal Hi-Fi stereo sound will be 

heard. 

and 

 will appear on the VCR display.

Your VCR can receive and record NICAM sound. The VCR is normally set so that NICAM sound 
is possible if it is present on the receiving signal, otherwise the VCR will automatically switch to 
receive the mono signal. NICAM sound can be turned off. If you wish to do this follow the 
procedure below:

Press the 

 button to display the 

main menu on the screen.

Press the [

/

] menu select buttons to 

select MODE.

Press the 

 button. NICAM will be 

selected.

Press 

[

/

] to select OFF.

Press the 

 button, to return to the menu screen.

Press the 

 button, to exit to normal screen.

•

If the tape being played back does not carry sound recorded on Hi-Fi tracks, L and R 

will not appear on the display.

•

lf the sound contains ‘crackling’ or ‘popping’ noises the sound quality may be 

improved by adjusting the tracking using the 

  

/

 buttons.

•

If the poor quality is for a long period the VCR will automatically select the mono track 

and the sound will be in mono.

•

NICAM sound may not be stereo.

➝

VC-MH713HM.book  Page 18  Monday, May 8, 2000  11:53 AM