VC-MH711HM (serv.man3). Service manual front cover to page 4 - Sharp VCR Service Manual (repair manual). Page 3

Read Sharp VC-MH711HM (serv.man3) Service Manual online

3
Format: VHS PAL standard
Video recording system: Four rotary heads, helical scan system
Video signal: PAL colour and I signals, 625 lines
Recording/playing time: 240 min max. with an E-240 tape SP
480 min max. with an E-240 tape LP
Tape width: 12.7mm
Tape speed: 23.39 mm/s SP
11.70 mm/s LP
Antenna: 75 ohm unbalanced
Receiving channel: UHF Channel E21-E69; VHF Channel B-J, S1-S41 (LM only)
RF converter output signal: UHF Channel E21-E69 (Preset to CH E36)
Power requirement: AC230V-240V, 50Hz
Operating temperature: 5
°C to 40°C
Storage temperature: –20
°C to 55°C
Weight: Approx. 3.2 kg
Dimensions: 360 mm (W) x 289 mm (D) x 93 mm (H)
VIDEO
Input: 1.0 Vp-p, 75 ohm
Output: 1.0 Vp-p, 75 ohm
S/N ratio: 45 dB (SP mode)
Horizontal resolution: Approx. 250 lines (SP mode with Super Picture)
AUDIO 0 dBs = 0.775 Vrms
Input: Line1: –3.8 dBs, 10k ohm
Line2: –3.8 dBs, 10k ohm
Output: Line1: –3.8 dBs, 1k ohm
Line2: –3.8 dBs, 1k ohm
Rear RCA: –3.8 dBs, 1k ohm
S/N ratio: 45 dB min. (SP mode)
Hi-Fi Frequency response: 80 Hz ~ 10 kHz (SP mode)
80 Hz ~ 5 kHz (LP mode)
Hi-Fi dynamic range: 85 dB min.
Hi-Fi WOW and flutter: 0.005% Max.
Hi-Fi Frequency response: 20 Hz ~ 20 kHz
Hi-Fi Distortion: 0.5% Max.
Hi-Fi cross talk (at 1kHz): 55 dB min.
Accessories included: 75 ohm coaxial cable
Operation manual
Infrared remote control
Batteries
As part of our policy of continuous improvement, we reserve
the right to alter design and specifications without notice.
Note: The antenna must correspond to the new standard DIN 45325
(IEC 169 - 2) for combined UHF/VHF antenna with 75 ohm connector.
SPECIFICATIONS
Page of 4
Display

Click on the first or last page to see other VC-MH711HM (serv.man3) service manuals if exist.