Read Sharp VC-MH711HM (serv.man13) User Guide / Operation Manual online
6
Press STOP to switch on your VCR.
This model will automatically tune in the TV channels in your area, sort them into a standard
order and set the clock.
This model will automatically tune in the TV channels in your area, sort them into a standard
order and set the clock.
VCR RESET
1.Press STOP to switch on the VCR.
2.Press and hold MENU and Channel
2.Press and hold MENU and Channel
buttons together on the front of the VCR for 10
seconds.
3.The AUTO INSTALLATION screen should now be showing on your TV.
4.Follow the on-screen display to proceed with auto installation.
4.Follow the on-screen display to proceed with auto installation.
All the programmes should now be correctly tuned in and the clock
set.
set.
The screen opposite should be showing on
your TV.
your TV.
Follow the instructions from the screens.
(Auto sort will take a few minutes to complete)
(Auto sort will take a few minutes to complete)
On completion, the MOVE MENU will appear
showing the present channel order. Press
MENU to exit.
showing the present channel order. Press
MENU to exit.
If the clock is NOT automatically set, the clock
screen will appear, refer to MANUALLY
SETTING THE CLOCK. To check the clock
has been set correctly, press DISPLAY until the
time appears on the display.
screen will appear, refer to MANUALLY
SETTING THE CLOCK. To check the clock
has been set correctly, press DISPLAY until the
time appears on the display.
If you wish to customise the channel order refer
to MANUALLY SORTING CHANNELS.
to MANUALLY SORTING CHANNELS.
INSTALLING YOUR VCR
AUTO INSTALLATION
Refer to the CUSTOMISED INSTALLATION chapter if:
●
Your VCR could not tune automatically - due to for example poor reception.
●
You wish to re-arrange the channel order.
●
You wish to change the time on the clock or if the VCR could not set the time.
AUTO INSTALLATION
PRESS SET KEY TO START
S E T : E N T E R M E N U : E X I T
●
If the screen above does not appear, follow
the procedure VCR RESET below.
the procedure VCR RESET below.
Click on the first or last page to see other VC-MH711HM (serv.man13) service manuals if exist.