VC-MH711HM (serv.man13). Operation manual - Sharp VCR User Guide / Operation Manual. Page 20

16

➝

HI-FI STEREO SOUND
Stereo sound is possible from Hi-Fi VCR’s if you have a stereo TV connected to the VCR
with a scart lead, or audio equipment connected with audio phono leads.  The VCR is
normally set so that stereo sound is possible. The sound output from the VCR is controlled by
the AUDIO OUT button on the remote control. If you wish to change the sound output you
can use the AUDIO OUT button as follows:

●

Press AUDIO OUT once. The LEFT audio channel will be sent to BOTH speakers. L will
appear on the VCR display.

●

Press AUDIO OUT twice. The RIGHT audio channel will be sent to BOTH speakers. R
will appear on the VCR display.

●

Press AUDIO OUT three times. The MONO track will be sent to BOTH speakers. L and
R will disappear from the VCR display.

●

Pressing AUDIO OUT a fourth time, normal Hi-Fi stereo sound will be heard. L and R
will appear on the VCR display.

●

If the tape being played back does not carry sound recorded on Hi-Fi tracks, L and R
will not appear on the display.

●

If the sound contains ‘crackling’ or ‘popping’ noises the sound quality may be improved
by adjusting the tracking using CHANNEL  

/     . 

●

If the poor quality is for a long period the VCR will automatically select the mono track
and the sound will be in mono.

●

NICAM sound may not be stereo.

NICAM Hi-Fi STEREO SOUND
Your VCR can receive and record NICAM sound. The VCR is normally set so that NICAM
sound is possible if it is present on the receiving signal, otherwise the VCR will automatically
switch to receive the mono signal. NICAM sound can be turned off. If you wish to do this
follow the procedure below:

1.Press MENU to display the main menu on

the screen.

2.Press [

] to select MODE.

3.Press SET. NICAM will be selected.
4.Press [

] to select OFF.

5.Press SET to return to the menu screen.
6.Press MENU to exit to normal screen.

/

/