Read Sharp VC-MH704 (serv.man7) User Guide / Operation Manual online
36
www.sharp.co.uk/support
VCR RESET
1.
Press the
STOP
button on the front of the VCR.
2.
Press and hold
MENU
and
CHANNEL DOWN
buttons together on the
front of the VCR for 10 seconds.
✔
VCR RESET IS NOW COMPLETE
Please continue with your previous procedure.
RF CHANNEL TUNING
If you have a preferred RF output channel this can be set manually between channels 21 and
69 by following the procedure below.
69 by following the procedure below.
1.
Press the
STANDBY
button.
2.
Press and hold the
MENU
button for 3 seconds.
3.
Wait for a flashing channel number to appear on the VCR display.
4.
The channel number can now be changed by using the
VCR CHANNEL
/
buttons.
5.
Your TV will now require tuning to the new
channel. (The screen opposite should be
displayed on the TV)
channel. (The screen opposite should be
displayed on the TV)
6.
Press the
SET
button to store.
RF THROUGH ON/OFF:
If you wish to connect your VCR to the TV with only a scart lead, the RF Output on your VCR
can be turned OFF and ON. To do this press the
CLEAR
then
SET
buttons on the
remote control at point 3 from
RF CHANNEL TUNING
above.
or
at point 4 of
AUTO
TUNING
on page 5. This will help minimise interference.
STOP
V CR R F
S E T
: E N T E R
ME NU : E X I T
SET
SET
(White text
blue background)
blue background)
TINS-3992UMZZ English.book Page 36 Monday, June 4, 2001 9:43 AM
Click on the first or last page to see other VC-MH704 (serv.man7) service manuals if exist.