Read Sharp VC-ME80HM Service Manual online
3
VC-ME80GM
VC-ME80HM
VC-ME80HM
1. SPECIFICATIONS
Format: VHS PAL standard
Video recording system: Two rotary heads, helical scan system
Video signal: PAL/SECAM colour and B/G signals, 625 lines (VC-ME80GM)
PAL colour and I signals, 625 lines (VC-ME80HM)
Recording/playing time: 240 min max. with SHARP E-240 tape (PAL/SP)
480 min max. with SHARP E-240 tape (PAL/LP)
Tape width: 12.7mm
Tape speed: 23.39 mm/s (PAL/SP)
11.70 mm/s (PAL/LP)
Antenna: 75 ohm unbalanced
Receiving channel: VHF Channel E2-S41 (VC-ME80GM Only)
UHF Channel E21-E69
RF converter output signal: UHF Channel E21-E69 (Preset to CH E36)
Power requirement: AC230V, 50Hz (VC-ME80GM), AC230V~240V, 50Hz (VC-ME80HM)
Power consumption: Approx. 19 W (VC-ME80GM), Approx. 19 W (AC240V/50Hz) (VC-ME80HM)
Operating temperature: 5
°
C to 40
°
C
Storage temperature: –20
°
C to 55
°
C
Weight: Approx. 4.5 kg
Dimensions: 430 mm (W) x 290 mm (D) x 92 mm (H)
(16-15/16" x 11-7/16 " x 3-5/8")
VIDEO
Input: 1.0 Vp-p, 75 ohm
Output: 1.0 Vp-p, 75 ohm
S/N ratio: 45 dB (SP mode)
Horizontal resolution: Approx. 260 lines (SP mode with Supper Picture)
AUDIO 0 dBs = 0.775 Vrms
Input: Line1: –3.8 dBs, 10k ohm
Line2: –3.8 dBs, 10k ohm (VC-ME80HM Only)
Line3: –3.8 dBs, 47k ohm (VC-ME80HM Only)
Line3: –3.8 dBs, 47k ohm (VC-ME80HM Only)
Output: Line1: –3.8 dBs, 1k ohm
Line2: –3.8 dBs, 1k ohm (VC-ME80HM Only)
REAR RCA: –3.8 dBs, 1k ohm (VC-ME80HM Only)
REAR RCA: –3.8 dBs, 1k ohm (VC-ME80HM Only)
S/N ratio: 46 dB min. (SP mode)
Frequency responce: 80 Hz ~ 10 kHz (SP mode)
80 Hz ~ 5 kHz (LP mode)
Hi-Fi Dynamic range: 90 dB TYP
Hi-Fi WOW and flutter: 0.005% Max.
Hi-Fi Frequency responce: 20 Hz ~ 20 kHz
Hi-Fi Distortion: 0.5% Max.
Hi-Fi Closs talk (at 1kHz): 55 dB min.
Accessories included: 75 ohm coaxial cable
Operation manual
Infrared remote control
Battery
Infrared remote control
Battery
As part of our policy of continuous improvement, we reserve
the right to alter design and specifications without notice.
the right to alter design and specifications without notice.
Note: The antenna must correspond to the new standard DIN 45325
(IEC 169 - 2) for combined UHF/VHF antenna with 75 ohm connector.
Click on the first or last page to see other VC-ME80HM service manuals if exist.