Read Sharp VC-M522HM (serv.man8) Service Manual online
44
VC-M522HM
VC-MH722HM
VC-MH732HM
VC-MH722HM
VC-MH732HM
FLOW CHART NO.19 RECORDING MODE TROUBLESHOOTING
Picture(Luminance) record is impossible.(E-E mode is possible.)
Is there luminance signal inputted at pin(19)
of IC201?
YES
NO
Is there luminance signal inputted at pin(42)
of IC201?
YES
NO
Is there luminance signal inputted at pin(26)
of IC201?
YES
NO
Is there luminance signal inputted at pin(23)
of IC201?
YES
NO
Is there luminance signal input and output at
pins(13) and (14) of IC201, respectively?
Check or replace the cylinder.
YES
NO
SP mode : Is there record FM signal(approx.20mVp-p) output at pins(88),(89)((SP1)) and pins(86),(87)
((SP2)) of IC201?
LP(PAL,SECAM) mode : Is there record FM signal(approx.20mVp-p) output at pins(93),(94)((EP1)) and
pins(92),(91) ((EP2)) of IC201? (For VC-MH742HM)
YES
Check line between pins(18) and (19) of IC201.
Check line between pins(21) and (42) of
IC201.(C208)
Check line between pins(39) and (26) of
IC201.(C212)
Is there luminance signal outputted at pin(39)
of IC201?
YES
Is voltage 5V applied to the CCD section
power terminal at pin(36) of IC201?
YES
Is CCD control voltage approx. 0V applied
normally to the pin(37) from pin(57) of IC201?
Is clock signal for CCD applied normally to
the pin(44) from (69) of IC201?
YES
Although picture record is possible, colour does not appear. (E-E mode is possible.)
Is voltage of 5V applied to the chroma section
power terminal pin(61) of IC201?
YES
NO
Is there chroma signal inputted at pin(46) of
IC201?
YES
NO
Is there chroma signal inputted at pin(58) of
IC201?
YES
NO
NO
Check peripheral circuit pin(61) of IC201 and
PC 5V line.
Check line between pin(60) and pin(46) of
IC201.(C512)
YES
Is the supply voltage of 5V(PRE/REC Vcc)
fed to pin(90) of IC201?
NO
Replace IC201.
Check whether the pins(73) and (75) of IC201
oscillate 4.43MHz.
Check parts around of X501.
Is there chroma signal outputted at pin(35) of
IC201?
YES
Check line between pins(58) and (35) of
IC201.
YES
YES
Check line betwen pins(24) and (23) of IC201.
(C210)
Check peripherlal circuit of pins(13) and (14)
of IC201.(R201,R202,C203,C225)
SP mode : Is there chroma ingredient included signal(approx.20mVp-p) output at pins(88),(89)((SP1))
and pins(86),(87)((SP2)) of IC201?
LP(PAL,SECAM)mode : Is there chroma ingredient included signal(approx.20mVp-p) output at pins
(93),(94)((EP1)) and pins(92),(91)((EP2)) of IC201? (For VC-MH742HM)
Click on the first or last page to see other VC-M522HM (serv.man8) service manuals if exist.