Read Sharp VC-M522HM (serv.man29) User Guide / Operation Manual online
GB-34
TROUBLESHOOTING
TROUBLESHOOTING
PROBLEM
ANSWER
Display is not working.
• Make sure the VCR is not in LOW POWER mode.
• Make sure the power cord is plugged in.
• Make sure the wall socket has power (plug another
• Make sure the power cord is plugged in.
• Make sure the wall socket has power (plug another
appliance in).
VCR will not operate -
appears in VCR display.
• Press the TIMER ON/OFF button to disengage timer.
VCR will not respond to
any commands.
any commands.
• Check CHILD LOCK is not engaged.
• Safety device operating: unplug VCR for 2 hours.
• Safety device operating: unplug VCR for 2 hours.
Tape cannot be loaded. • Make sure there is no other tape in the VCR.
• Make sure you are loading the tape correctly.
VCR cannot be
operated by remote
control.
operated by remote
control.
• Remote control is too far away from the main unit.
• Point the remote control at the VCR.
• Batteries are flat - replace both.
• Batteries have not been inserted correctly.
• VCR is positioned in strong light.
• Point the remote control at the VCR.
• Batteries are flat - replace both.
• Batteries have not been inserted correctly.
• VCR is positioned in strong light.
No picture appears.
• Make sure TV is set to the video channel.
• Check all connecting cables.
• Check all connecting cables.
Rewind is not possible.
• Make sure tape is not at the start.
Picture does not change
even though
CHANNEL
even though
CHANNEL
/
buttons are pressed.
• Make sure VCR is not in timer or menu mode.
Desired channel position
cannot be selected.
cannot be selected.
• The channel position has been set to be skipped.
Cancel the skip mode for that channel.
No colour or poor TV
picture on normal
viewing.
picture on normal
viewing.
• Make sure all the cables are connected properly.
• Make sure VCR power cord is properly plugged in.
• Make sure VCR power cord is properly plugged in.
Playback picture is
snowy.
snowy.
• Adjust the tracking using CHANNEL
/
buttons.
• Try another tape.
• The video heads may have been contaminated - refer
• The video heads may have been contaminated - refer
to a SHARP Service Facility.
Tape is automatically
ejected when pressing
REC (
ejected when pressing
REC (
) or TIMER
ON/OFF buttons.
• The record-protection tab has been removed.
VIDEOPLUS+ does not
record desired
programme.
record desired
programme.
• Broadcast does not carry VPS/PDC signal which alters
recording time.
• Check VPS/PDC mode is switched to ON.
• Ensure date and time are correctly set on the VCR.
• Ensure date and time are correctly set on the VCR.
If problems persist contact the SHARP Helpline on tel: 0990-274277
TINS-3584UMZZ VC-M522HM Page 34 Monday, June 14, 1999 2:46 PM
Click on the first or last page to see other VC-M522HM (serv.man29) service manuals if exist.