VC-M333 (serv.man5). Operation Manual - Part 4 - Basic operations, Advanced operations, Special features, Customised installation - Sharp VCR User Guide / Operation Manual. Page 4

11

Select the channel by using the number buttons on the remote control, or select the             
next/previous channel by pressing 

 

[

or

].

To change between single digit and 2-digit channel numbers, press 

 

.

For example, for channel 24, press 

 

 then press 

 

.

You can record the channel you are watching or a different channel.

Insert a video tape into your VCR.

Select the channel you wish to record on the VCR.

To start recording, press 

 

(

).

To pause during recording, press 

 

(

).

To continue recording, press 

(

).

To stop recording, press 

 (

) once.

To specify a stop time, press 

(

).

Each additional press of 

(

) will delay 

the stop time by 10 minutes.

To stop recording at any time, press 

 (

) once.

•

If the tape ends before the recording is complete the VCR will stop recording, rewind, 
eject the tape and place the VCR into POWERSAVE/STANDBY mode, or just eject the 
tape and place the VCR in POWERSAVE/STANDBY timer mode if the VCR is in timer 
record mode.

•

If the VCR ejects the video tape when you press 

(

) the tape is record 

protected. i.e. record protection tab has been removed. 

TINS-3809UMZZ ENGLISH.book  Page 11  Monday, April 3, 2000  2:03 PM