VC-M332HM. Contents to Specifications - Sharp VCR Specification (repair manual). Page 3

Read Sharp VC-M332HM Specification online

3
VC-M332HM
VC-MH742HM
1. SPECIFICATIONS
Format: VHS PAL standard
Video signal: PAL colour and I signals, 625 lines
Recording/playing time: 240 min max. with SHARP E-240 tape (PAL SP)
480 min max. with an E-240 tape (LP)
Tape width: 12.7mm
Tape speed: 23.39 mm/s (PAL SP)
11.70 mm/s (PAL LP)
Antenna: 75 ohm unbalanced
Receiving channel: UHF Channel E21-E69
RF converter output signal: UHF Channel E21-E69 (Preset to CH E36)
Power requirement: AC230V ~240V, 50Hz
Power consumption: Approx. 15W (AC230V/50Hz) and 4W max. at stand-by mode
(VC-M332HM)
Approx. 20W (AC230V/50Hz) and 4W max. at stand-by mode
(VC-MH742HM)
Operating temperature: 5
°
C to 40
°
C
Storage temperature: –20
°
C to 55
°
C
Weight: Approx. 3.2 kg
Dimensions: 430 mm (W) x 281 mm (D) x 92 mm (H)
(15-30/32" x 11-1/16" x 3-25/32")
VIDEO
Input: 1.0 Vp-p, 75 ohm
Output: 1.0 Vp-p, 75 ohm
S/N ratio: 45 dB (SP)
Horizontal resolution: 260 lines (SP mode with Super Picture)
AUDIO 0 dBs = 0.775 Vrms
Input: Line1: -3.8 dBs, 10k ohm
Line 2:-3.8 dBs, 10k ohm
Line 3:-3.8 dBs, 47k ohm
Output: Line1: -3.8 dBs, 1k ohm
Line 2:-3.8dBs, 1k ohm
REAR RCA: -3.8dBs, 1k ohm (VC-MH742HM)
S/N ratio: 45 dB (VC-M332HM) / 46 dB (VC-MH742HM)
Frequency responce: 80 Hz ~ 10 kHz (SP mode)
80HZ ~ 5Hz (LP mode)
Hi-Fi Dynamic Range: 90 dB TYP
Hi-Fi Wow and Flutter: 0.005%
Hi-Fi Frequency Responce: 20 Hz ~ 20 k Hz
Hi-Fi Distortion: 0.5% max.
Hi-Fi Crosstalk (at 1kHz): 55 dB min.
Accessories included: 75 ohm coaxial cable
Operation manual
Infrared remote control
Battery
                                         Note: The antenna must correspond to the new standard DIN 45325
(IEC 169 - 2) for combined UHF/VHF antenna with 75 ohm connector.
Page of 3
Display

Download Sharp VC-M332HM Specification