VC-M332HM (serv.man15). Electrical Troubleshooting Guide - Sharp VCR Service Manual (repair manual). Page 13

Read Sharp VC-M332HM (serv.man15) Service Manual online

49
VC-M332HM
VC-MH742HM
FLOW CHART NO.27 LINEAR SOUND MODE TROUBLESHOOTING(2) (For VC-M332HM)
No linear sound recording(E-E mode is possible)
Is there "L" level at pin(99) of 
IC201?
Check the AUDIO MUTE (H) line between pin
(99) of IC201 and pin(21) of IC701.
YES
YES
YES
YES
YES
NO
NO
NO
NO
NO
Is there signal at pin(4) of IC201?
Is the supply voltage of 12V fed to 
pin(2) of T651?
Check M 12V line.
Is there signal(Bias) at pin(5) of T651?
Check the Bias oscillation circuit(T651,Q651,
Q652) and NORMAL BIAS CTL line.
Is there signal(Bias + Audio sig.) at 
pin(6) of T651?
Check peripheral circuits of T651.
Check the MH-AA harness and A/C 
head.
Replace IC201.
FLOW CHART NO.28 LINEAR SOUND MODE TROUBLESHOOTING(3) (For VC-M332HM)
No linear sound playback(E-E mode is possible)
Is there signal at pin(100) of IC201?
Are the MH-AA harness and the PB AMP peri-
pheral parts normal?
YES
YES
YES
YES
NO
Is there "L" level at pin(99) of IC201?
Check the AUDIO MUTE (H) line between pin
(99) of IC201 and pin(21) of IC701.
YES
NO
Is there signal at pin(11) of IC201?
Replace IC201.
NO
NO
Clean A/C head.
Readjust azimuth
Is the azimuth hight of A/C head properly 
adjusted?
Replace A/C head.
Page of 18
Display

Click on the first or last page to see other VC-M332HM (serv.man15) service manuals if exist.