Read Sharp VC-M313 (serv.man19) User Guide / Operation Manual online
27
If problems persist contact the SHARP Helpline on tel: 0990-274277
MORE INFORMATION ABOUT YOUR VCR
VCR DIGITAL DISPLAY
1.
TIMER
indicator.
2.
AUDIO OUTPUT
indicators.
3.
RECORDING
indicator.
4.
CHILD LOCK
indicator.
5.
AM/PM
indicators.
6.
STOP
indicator.
7.
VCR mode
indicator.
8.
PRESET CHANNEL
indicator.
9.
VIDEO PROGRAMMING SYSTEM/PROGRAMME DELIVERY CONTROL
indicator.
10.
LONG PLAY
indicator.
11.
STANDARD PLAY
indicator.
12.
VIDEO TAPE
indicator.
13.
DECODER
indicator.
NOTE:
•
Some models do not have all the features shown, therefore, they will not appear on the
display.
display.
SP
Pr
LP
L R
V
PS
P
DC
VCR
AM
PM
ST
ST
OP
OP
D
1
2
3
4
5
6
7
8
9
12 11
10
13
Module 19B.fm Page 27 Thursday, June 15, 2000 9:57 AM
28
If problems persist contact the SHARP Helpline on tel: 0990-274277
MORE INFORMATION ABOUT YOUR VCR
ON-SCREEN DISPLAY
All the information you need on the VCR status will be summarised on the on-screen display.
If you are recording, playing back a tape or watching a broadcast on the video channel you
can call up three standard on-screen displays. The display can be selected by pressing the
If you are recording, playing back a tape or watching a broadcast on the video channel you
can call up three standard on-screen displays. The display can be selected by pressing the
MODE OSD
button on the remote control, 1,2,3 or 4 times.
1.
AUTO
, the current mode and channel
number will be displayed for 3 seconds when an
operation or number button is pressed.
operation or number button is pressed.
2.
FULL
., all the active features will also be shown
on screen.
3.
COUNTER
, this display will show the tape
counter and amount of tape remaining.
4.
DISPLAY OFF
, this will remove the display
from the screen.
NOTES:
•
The default time and date will not be displayed if the clock has not been set.
•
The VCR will return to display
1
. each time it is switched on.
•
If you are recording from this VCR to another, make sure you remove the display from
the screen otherwise it will be recorded.
the screen otherwise it will be recorded.
1.
■
1 CH 5 9
S P
Programme number and channel
Tape Status
Tape speed
Tape remaining
Time
Date
Tape counter
2.
■
1 CH 5 9
S U P E R
P .
ON
S P
2 2 : 0 0
R EM 1 : 0 5
9 / 0 7 0 0
0 : 0 0 . 0 0
REM 1:05
0:00.00
3.
TINS-3812UMZZ ENGLISH.book Page 28 Friday, May 5, 2000 11:43 AM
29
If problems persist contact the SHARP Helpline on tel: 0990-274277
MORE INFORMATION ABOUT YOUR VCR
SPECIFICATIONS
•
Specifications are subject to change without notice as part of our policy of continuous
improvement.
improvement.
•
No liability is accepted for any inaccuracies or omissions in this publication, although
every possible care has been taken to make it complete and as accurate as possible.
every possible care has been taken to make it complete and as accurate as possible.
Format:
VHS PAL standard
Number of heads:
Two
Video signal system::
PAL colour or monochrome signal: 625 lines
Maximum playing time:
480 min. with E-240 video cassette in Long Play
(LP) mode
(LP) mode
Tape width:
12.7 mm
Tape speed:
23.39 mm/s Standard Play (SP): 11.70 mm/s
Long Play (LP)
Long Play (LP)
Antenna:
75
Ω
unbalanced
Reception channels:
UHF channel 21-69
(VHF channels A-J - VC-M313LM only)
(VHF channels A-J - VC-M313LM only)
RF output signal:
UHF channel 21-69
Power requirement:
AC 230-240V, 50 Hz
Power consumption:
16 W approx. (STANDBY
≤
3W)
Operating temperature:
5 ˚C to 40 ˚C
Storage temperature:
-20 ˚C to 55 ˚C
Video input:
1.0 Vp-p, 75
Ω
Video output:
1.0 Vp-p, 75
Ω
Audio input:
Line 1: -3.8 dBs, 10 k
Ω;
Line 2: -3.8 dBs, 47 k
Ω
Audio output:
Line 1: -3.8 dBs, 1 k
Ω
Dimensions:
360(W) x 289(D) x 93(H) mm
Weight:
3.2 kg (approx.)
Supplied accessories:
75
Ω
RF Connection cable, operation manual,
remote control, AA/R6/UM3 battery (x2)
TINS-3812UMZZ ENGLISH.book Page 29 Friday, May 5, 2000 11:43 AM
30
If problems persist contact the SHARP Helpline on tel: 0990-274277
TROUBLESHOOTING
TROUBLESHOOTING
BEFORE REQUESTING SERVICE!
The following conditions do not always denote trouble. Therefore, perform the checks
described below before calling for service. If the problem cannot be corrected by the use of
this guide, remove the mains plugs from the wall socket and contact the dealer or supplier
from whom the unit was purchased in order to obtain service. Where this is not possible, please
contact the telephone number listed below, you will then be given details of how to obtain
service.
described below before calling for service. If the problem cannot be corrected by the use of
this guide, remove the mains plugs from the wall socket and contact the dealer or supplier
from whom the unit was purchased in order to obtain service. Where this is not possible, please
contact the telephone number listed below, you will then be given details of how to obtain
service.
Tel.: 0990 274277 - Please note: All calls will be charged at local rate.
AREA
PROBLEM
POSSIBLE CAUSE/CURE
INSTALLATION
TV will not tune in to
the VCR.
the VCR.
• Check all the cables are correctly
connected.
• Check your TV manual for correct tuning of
your TV.
Auto Installation
screen does not
appear when the
VCR is switched on
OR Auto Installation
is not complete.
screen does not
appear when the
VCR is switched on
OR Auto Installation
is not complete.
• Reset the VCR and complete AUTO
INSTALLATION again. (Refer to VCR Reset
at the back of the book.)
at the back of the book.)
POWER
Display is not
working.
working.
• Make sure the power cord is plugged in.
• Make sure the wall socket has power
• Make sure the wall socket has power
(check by plugging another appliance in).
VCR will not operate
-
-
appears in VCR
display.
• Press the TIMER ON/OFF button to
disengage timer.
VCR will not respond
to any commands.
to any commands.
• Check CHILD LOCK is not engaged.
• Safety device operating: unplug VCR for 2
• Safety device operating: unplug VCR for 2
hours.
PLAYBACK
No picture appears. • Make sure the TV is set to the video
channel.
• Check all connecting cables.
Playback picture is
snowy.
snowy.
• Adjust the tracking using CHANNEL
/
buttons.
• Try another tape.
• The video heads may have been
• The video heads may have been
contaminated - refer to a SHARP Service
Facility.
Facility.
TINS-3812UMZZ ENGLISH.book Page 30 Friday, May 5, 2000 11:43 AM
