Read Sharp VC-M311HM (serv.man5) User Guide / Operation Manual online
C H A N N E L P R E S E T
C H A N N E L S O R T
C L O C K
C L O C K
CUSTOMISED INSTALLATION
MANUALLY TUNING A CHANNEL
It should not be necessary to tune in a broadcast channel manually except in unusual
circumstances such as poor signal.
To manually tune in a channel follow the procedure below.
circumstances such as poor signal.
To manually tune in a channel follow the procedure below.
➝
PRESET
1
CHANNEL
CH21
FINE TUNING
SKIP
ON
OFF
▼
▼
1. Press MENU.
2. Press [
2. Press [
] to select SET UP. Press
SET to confirm.
3. CHANNEL PRESET will be highlighted.
Press SET.
4. Press [
] to select CHANNEL.
5. IMPORTANT NOTE: (VC-M301LM
model only) Press
to select CH
or CC. This will determine whether off
air (CH) or cable (CC) is tuned first.
Note that both off air and cable will be
tuned regardless of the setting.
air (CH) or cable (CC) is tuned first.
Note that both off air and cable will be
tuned regardless of the setting.
6. Press [
] to start tuning in either
direction. Tuning will stop when a
channel is received. If it is not the
desired channel, press [
channel is received. If it is not the
desired channel, press [
] to
continue tuning.
7. Press [
] to select FINE TUNING.
Press and hold [
] until the
sharpest colour picture is obtained.
8. Press [
] to select SKIP.
The SKIP function determines whether
the channel can be selected when using
CHANNEL / instead of the
NUMBER BUTTONS.
the channel can be selected when using
CHANNEL / instead of the
NUMBER BUTTONS.
9. Press [
] to select ON or OFF for
this option.
10. Press SET to confirm.
11. Press MENU to leave this function.
11. Press MENU to leave this function.
/
/
/
/
/
/
/
/
21
VC-M301HM/LM 3/2/99 11:57 am Page 25
Click on the first or last page to see other VC-M311HM (serv.man5) service manuals if exist.