Read Sharp VC-M311HM (serv.man4) User Guide / Operation Manual online
AUTO INSTALLATION
PRESS SET KEY TO START
S E T : E N T E R M E N U : E X I T
Press STOP to switch on your VCR.
This model will automatically tune in the TV channels in your area.
This model will automatically tune in the TV channels in your area.
VCR RESET
1.Press STOP to switch on the VCR.
2.Press and hold MENU and Channel
buttons together on the front of the VCR for 10
seconds.
3.The AUTO INSTALLATION screen should now be showing on your TV.
4.Follow the on-screen display to proceed with installation.
All the programmes should now be correctly tuned in and the clock
set.
set.
INSTALLING YOUR VCR
AUTO INSTALLATION
Refer to the CUSTOMISED INSTALLATION chapter if:
●
Your VCR could not tune automatically - due to for example poor reception.
●
You wish to re-arrange the channel order.
●
You wish to change the time on the clock.
●
If the screen above does not appear, follow the
procedure VCR RESET below.
procedure VCR RESET below.
The screen opposite should be showing on
your TV.
your TV.
Follow the instructions from the screens.
(Auto tune will take a few minutes to complete)
(Auto tune will take a few minutes to complete)
On completion, the MOVE MENU will appear
showing the present channel order. Press
MENU to exit.
The clock screen will now appear. If you
experience any difficulties setting the clock,
refer to MANUALLY SETTING THE CLOCK.
showing the present channel order. Press
MENU to exit.
The clock screen will now appear. If you
experience any difficulties setting the clock,
refer to MANUALLY SETTING THE CLOCK.
If you wish to customise the channel order refer
to MANUALLY SORTING CHANNELS.
to MANUALLY SORTING CHANNELS.
6
VC-MH711HM/LM 3/2/99 2:09 pm Page 10
Click on the first or last page to see other VC-M311HM (serv.man4) service manuals if exist.