VC-M304. Contents and specification - Sharp VCR Specification (repair manual)

In the interests of user-safety (Required by safety regula-
tions in some countries) the set should be restored to its
original condition and only parts identical to those speci-
fied be used.

Page

SPECIFICATIONS ....................................................................................................................... 3
ROM MAP .................................................................................................................................... 4
REPLACEMENT PARTS LIST ..................................................................................................... 5
PACKING OF THE SET ............................................................................................................... 9

This service manual covers only those items that differ
from the VC-M314HM.  For further information on items not
covered by this supplement refer to the Service Manual for
VC-M314HM.

Format: VHS PAL standard

Video signal: PAL colour and I signals, 625 lines

Recording/playing time: 240 min max. with an E-240 tape SP

480 min max. with an E-240 tape LP

Tape width: 12.7mm

Tape speed: 23.39 mm/s SP

11.70 mm/s LP

Antenna: 75 ohm unbalanced

Receiving channel: UHF Channel E21-E69;

VHF Channel A

~

J,S1-S41(LM Models only)

RF converter output signal: UHF Channel E21-E69 (Preset to CH E36)

Power requirement: AC230V-240V, 50Hz

                   Power consumption: Approx. 15W (AC230V/50Hz) and 3W max. in stand-by mode

Operating temperature: 5

°C to 40°C

Storage temperature: –20

°C to 55°C

Weight: Approx. 3.2 kg

Dimensions: 360 mm (W) x 289 mm (D) x 93 mm (H)

(14-3/16" x 12-1/32" x 3-21/32")

VIDEO

Input: 1.0 Vp-p, 75 ohm

Output: 1.0 Vp-p, 75 ohm

S/N ratio: 48 dB (SP mode)

Horizontal resolution: Approx. 260 lines (SP mode with Super Picture)

AUDIO 0 dBs = 0.775 Vrms

Input: Line1: –3.8 dBs, 10k ohm

Output: Line1: –3.8 dBs, 1k ohm

S/N ratio: 46 dB min. (SP mode)

 Frequency response: 80 Hz ~ 10 kHz (SP mode)

80 Hz ~ 5 kHz (LP mode)

Accessories included: 75 ohm coaxial cable

Operation manual
Infrared remote control
Batteries

Note: The antenna must correspond to the new standard DIN 45325

(IEC 169 - 2) for combined UHF/VHF antenna with 75 ohm connector.