Read Sharp VC-M303 (serv.man21) User Guide / Operation Manual online
30
If problems persist contact the SHARP Helpline on tel: 0990-274277
VCR RESET
1.
Press the
STOP
button on the front of the VCR.
2.
Press and hold
MENU
and
CHANNEL
buttons together on the front of the
VCR for 10 seconds.
✔
VCR RESET IS NOW COMPLETE
Please continue with your previous procedure.
RF CHANNEL TUNING
If you have a preferred RF output channel this can be set manually (21-69) by following the
procedure below.
procedure below.
1.
Press the
STANDBY
button.
2.
Press and hold the
MENU
button on the VCR front panel for 3 seconds.
3.
Wait for a flashing channel number to appear on the VCR display.
4.
The channel number can now be changed by using the
CHANNEL
or
buttons.
5.
Press the
SET
button to store.
6.
Your TV will now require tuning to the new channel.
RF THROUGH ON/OFF:
If you wish to connect your VCR to the TV with only a scart lead, the RF Output on your VCR
can be turned OFF and ON by pressing the
CLEAR
button then the
SET
button
on the remote control at point 2 of the
TUNING THE TV INTO THE VCR
section of this
manual on page 5. This will help minimise interference.
STOP
CH
CHANNEL
CHANNEL
CLEAR
SET
Module 25.fm Page 30 Monday, May 15, 2000 9:52 AM
Click on the first or last page to see other VC-M303 (serv.man21) service manuals if exist.