VC-M303 (serv.man20). Operation Manual - Part 4 - Basic operation, Advanced operation - Sharp VCR User Guide / Operation Manual. Page 4

12

Select the channel you wish to record by using the number buttons on the VCR remote 

control, or select the next/previous channel by pressing 

 

 or 

 on the 

remote control or on the VCR front panel.

To change between single digit and 2-digit channel numbers, press 

 

.

For example, for channel 24, press 

 

 then press 

 

.

You can record the channel you are watching or a different channel.

Insert a video tape into your VCR.

Select the channel you wish to record on the VCR as above.

To start recording, press 

 

.

To pause during recording, press 

 

.

To continue recording, press 

 

.

To stop recording, press 

  

once.

Press 

 

.

To specify a stop time, each additional press of 

 

 will delay the stop time by 10 

minutes.

To stop recording at any time, press 

  

once.

•

If the tape ends before the recording is complete the VCR will stop recording, rewind, 
eject the tape and place the VCR into STANDBY mode, or just eject the tape and place 
the VCR in STANDBY timer mode if the VCR is in timer record mode.

•

If the VCR ejects the video tape when you press 

 

 the tape is record protected. 

i.e. record protection tab has been removed. 

TINS3807 ENGLISH.book  Page 12  Wednesday, May 10, 2000  10:17 AM