VC-M302HM (serv.man4). Operation manual - Sharp VCR User Guide / Operation Manual. Page 29

GB-29

Display is not working.

• Make sure the power cord is plugged in.
• Make sure the wall socket has power (plug another 

appliance in).

VCR will not operate - 

 

appears in VCR display.

• Press the TIMER ON/OFF button to disengage timer.

VCR will not respond to 
any commands.

• Check CHILD LOCK is not engaged.
• Safety device operating: unplug VCR for 2 hours.

Tape cannot be loaded. • Make sure there is no other tape in the VCR.

• Make sure you are loading the tape correctly.

VCR cannot be 
operated by remote 
control.

• Remote control is too far away from the main unit.
• Point the remote control at the VCR.
• Batteries are flat - replace both.
• Batteries have not been inserted correctly.
• VCR is positioned in strong light.

No picture appears.

• Make sure TV is set to the video channel.
• Check all connecting cables.

Rewind is not possible.

• Make sure tape is not at the start.

Picture does not change 
even though 
CHANNEL 

/

 

buttons are pressed.

• Make sure VCR is not in timer or menu mode.

Desired channel position 
cannot be selected.

• The channel position has been set to be skipped. 

Cancel the skip mode for that channel.

No colour or poor TV 
picture on normal 
viewing.

• Make sure all the cables are connected properly.
• Make sure VCR power cord is properly plugged in.

Playback picture is 
snowy.

• Adjust the tracking using CHANNEL 

 

/

 

buttons.

• Try another tape.
• The video heads may have been contaminated - refer 

to a SHARP Service Facility. 

Tape is automatically 
ejected when pressing 
REC (

) or TIMER

ON/OFF buttons.

• The record-protection tab has been removed.

Playback/ recording 
does not playback in 
stereo.

• Ensure VCR is connected to a stereo TV and SCART 

lead.

• Programme may not carry stereo.