Read Sharp VC-M27HM (serv.man25) Technical Bulletin online
Sharp Electronics (UK) Limited
Reference TB-T9905070
Revision 1
White – Carry out as required, Yellow – Carry out as required and whenever the unit comes in for service, Red – Carry out on all units
VCR990702
Month of Issue: July 1999
Classification: White
VIDEO TECHNICAL BULLETIN
Page 1 of 2
MODELS
VCM26HM
VCM271HM
VCM27HM
VCMH67HM
VCMH68HM
SYMPTOM Failure of the front panel buttons.
CAUSE
Excess travel of the button, causing the hinge to fracture.
ACTION
Replace the broken button assemby and add the holder as shown in the following
diagrams.
diagrams.
Note that there are two types of holder for different models.
Holder one
VCM26HM VCMH67HM
VCM26HM VCMH67HM
Holder two
VCM271HM VCM27HM VCMH68HM
VCM271HM VCM27HM VCMH68HM
REF NO
DESCRIPTION
PART NUMBER
PRICE CODE
-
Holder
LHLDZ2072GEZZ
AE
-
Holder
LHLDZ2035GEZZ
AD
1. Remove the original button assembly by cutting the melt point as shown
Sharp Electronics (UK) Limited
Reference TB-T9905070
Revision 1
White – Carry out as required, Yellow – Carry out as required and whenever the unit comes in for service, Red – Carry out on all units
VCR990702
Month of Issue: July 1999
Classification: White
VIDEO TECHNICAL BULLETIN
Page 2 of 2
2a. Melt the Standby and Eject button into position for Holder One models (note that there is
only one melt point)
2b. Melt the Standby and Eject button into position for Holder Two models (note that there
are two one melt point)
3. Fitting the Holder