Read Sharp VC-M201HM (serv.man2) Technical Bulletin online
Sharp Electronics (UK) Limited
Originator AvW Supervisor Approval Date / / Reference PJVCM20RF
Revision
White – Carry out as required, Yellow – Carry out as required and whenever the unit comes in for service, Red – Carry out on all units
VCR960902
Month of Issue:
Classification: Routine
VIDEO TECHNICAL BULLETIN
Page 1 of 1
MODELS
VCM20HM
VCM201HM
SYMPTOM No RF output from modulator.
CAUSE
RF turned off by software.
ACTION
To turn RF back on, follow the procedure outlined below.
1. Press the mode button ( located to the left of the shuttle control ) for about two
seconds. The VCR's display will indicate 'AUTO CL'.
2. Press the play button and the display will change to 'OFF:RF'.
3. Press channel +. The display will now change to 'ON:RF'.
4. Press the mode button to return to the normal mode.
3. Press channel +. The display will now change to 'ON:RF'.
4. Press the mode button to return to the normal mode.
Please note that these instructions are given on page 6 of the instruction booklet.
Display