Read Sharp TU-32GD1E (serv.man6) Service Manual online
12
TU-32GD1E
TU-37GD1E
TU-37GD1E
REMOVING OF MAJOR PARTS
1. Remove the two lock screws from each of the right and left Side Shield, and detach the Side Shield by sliding
them backward.
2. Remove the five lock screws from the top cabinet, and detach the cabinet by sliding it backward.
3. Remove the five lock screws from the bottom cabinet, and detach the cabinet by sliding it backward.
4. Remove the tow lock screws from the Front Panel, and detach the panel.
5. Remove the lock screws and six hexagon shaft screws from the Rear Panel, and detach the Rear Panel.
6. Remove the DVI PWB.
6-1. Remove the revit.
6-2. Remove the four lock screws from the DVI PWB angle.
6-3. Remove the four lock screws from the DVI PWB.
1
1
2
2
2
Top Cabinet
Side Shield (Right)
Side Shield (Left)
3
3
3
4
Bottom Cabinet
Front Panel
5
5
5
6-2
6-3
6-1
Rear Panel
DVI PWB
DVI PWB Angle
SD Cover
Card Cover
13
TU-32GD1E
TU-37GD1E
TU-37GD1E
7. Remove the DC/DC Converter PWB, TMDS PWB and AUDIO I/F PWB.
7-1. Remove the four lock screws from the TMDS PWB angle.
7-2. Remove the four lock screws from the DC/DC Converter PWB.
7-3. Remove the four lock screws from the TMDS PWB.
7-4. Remove the two lock screws from the AUDIO I/F PWB.
8. Remove the five lock screws from the Power PWB.
9. Remove the AV PWB, PC Card PWB and 1-bit AMP PWB.
9-1. Remove the five lock screws from the AV PWB.
9-2. Remove the two lock screws from the 1-bit AMP PWB.
9-3. Remove the three lock screws from PC Card PWB.
9-4. Remove the six lock screws from AV PWB Angle.
7-2
7-1
7-1
7-3
7-4
DC/DC
Converter
PWB
Converter
PWB
TMDS PWB Shield
TMDS PWB
TMDS PWB Angle
AUDIO I/F PWB
8
Power PWB
9-1
9-2
9-3
9-4
AV PWB
PC Card PWB
1-bit AMP PWB
AV PWB Angle
14
TU-32GD1E
TU-37GD1E
TU-37GD1E
10. Remove the cooling fan (large), main PWB and CPU PWB.
10-1. Detach the cooling fan(large).
10-2. Remove the seven lock screws from the Main PWB.
10-3. Remove the six lock screws from the IBO PWB.
10-4. Remove the five lock screws from the CPU PWB.
10-2. Remove the seven lock screws from the Main PWB.
10-3. Remove the six lock screws from the IBO PWB.
10-4. Remove the five lock screws from the CPU PWB.
11. Remove the cooling fan (small) and Front Terminal PWB.
11-1. Detach the cooling fan (small).
11-2. Remove the four lock screws from the Front Shield.
11-3. Remove the one lock screw from the Front Terminal PWB.
11-2. Remove the four lock screws from the Front Shield.
11-3. Remove the one lock screw from the Front Terminal PWB.
10-2
10-4
10-3
10-1
Main PWB Angle
Cooling Fan
IBO PWB
CPU PWB
IBO Shield
Main PWB
Radiating
Shield
Ass’y
Shield
Ass’y
CPU Shield
11-2
11-3
11-1
Front Shield
Front PWB
Cooling Fan