Read Sharp LC-M3700 (serv.man28) User Guide / Operation Manual online
GB
20
Connecting Multiple Monitors (Continued)
■ Monitors can be externally controlled using the RS-232C interface (COM port) of a PC, and,
in this case too, multiple monitors can be connected in a daisy chain. By assigning each
monitor an ID number (see page 54), you can perform input switching, adjustment and
status monitoring of individual monitors.
monitor an ID number (see page 54), you can perform input switching, adjustment and
status monitoring of individual monitors.
"First monitor
"Second monitor
"PC
RS-232C
cross cable
cross cable
To RS-232C
INPUT terminal
INPUT terminal
To COM port
To RS-232C
INPUT terminal
INPUT terminal
To RS-232C
OUTPUT terminal
OUTPUT terminal
To RS-232C
OUTPUT terminal
OUTPUT terminal
RS-232C
cross cable
cross cable
Related topic:
PC Operation
35
Example: 3
Use by selecting “INPUT2 Select” and setting INPUT2 to “Output”.
54
PC(ANALOG)
INPUT
INPUT
PC
(ANALOG)
INPUT
(ANALOG)
INPUT
INPUT 3/PC
(ANALOG)
OUTPUT
(ANALOG)
OUTPUT
INPUT 2 (INPUT/
OUTPUT)
OUTPUT)
(White:
audio
left)
audio
left)
(Red:
audio
right)
audio
right)
PC audio cable
RGB cable
RGB cable
shows the
signal flow.
signal flow.
To video output
terminal
To PC audio output
terminal
2
1
Click on the first or last page to see other LC-M3700 (serv.man28) service manuals if exist.