LC-90LE757E (serv.man2) - Sharp TV User Guide / Operation Manual. Page 72

Before using the 3D glasses for the first time, 
remove the insulating sheet attached to them.

Attach either of the supplied nose pads as needed 
(such as when the glasses do not fit properly). The 
glasses come with a large and small nose pad.

Removing the nose pad

Attaching the nose pad

To view 3D images, it is necessary to pair the 3D 
glasses and TV.

•  To confirm pairing of the 3D glasses and TV, make sure 

that 3D images are displayed on the TV screen. 

•  When the power button is pressed for 2 or more 

seconds with the power off, pairing with the TV starts. 
When pairing is completed successfully, the LED blinks 
in green for 3 seconds.

•  To switch between 2D and 3D modes, briefly press the 

power button.

50 cm–2 m

•  When paired, make sure that the 3D glasses are kept 

at a distance of 50 cm–2 m from the TV. If too close, 
pairing cannot be performed.

When viewing 3D images, you can press the power 
button to switch between 2D and 3D modes. This is 
useful when several people are viewing 3D images 
on the same TV with some people wanting to watch 
in 3D and some people wanting to watch in 2D.

E

When you press and hold for less than 2 
seconds while viewing 3D images, the LED light 
blinks in red and the 3D images switch to 2D 
images.

E

When you press and hold for less than 2 
seconds while viewing 2D images, the LED light 
blinks in green and the 2D images switch to 3D 
images.

The 3D glasses can be used by receiving a signal 
sent from the TV.
The 3D glasses turn off automatically after 15 
seconds if no signal is received from the TV.

E

From directly the TV: approx. 5 m (within approx. 30° 
horizontally and 20° vertically)