LC-70LE741E (serv.man10). Adjustment - Sharp TV Service Manual (repair manual). Page 12

LC-60/70LE740E/RU,741E/S,743E,60LE840E/RU,841E/S,843E,80LE645E/RU,646E/S,648E

5 – 12

11)  Start mode [INPUT MODE START]

Example of option: “NORMAL”, “TVD (002TV)”, “INPUT1”, “INPUT2”, “INPUT3”, “HDMI1”, “HDMI2”, “HDMI3”, “HDMI4”.

12)  Input fixed [INPUT MODE FIXED]

13)  Speaker ON/OFF selection [LOUD SPEAKER]

14)  Remote control path through [RC PATH THROUGH]

15)  232C power ON control [232C POWON]

Option

“NORMAL” or “Input source 1 (input selection or channel)” ... (loop enabled)

Default “NORMAL”
Function 

Which kinds of input source or channel is decided when the power turning on.
     NORMAL

: The content of the last memory is followed.

Remarks

• When setting to not Normal, ON TIMER (Watching reservation) has priority.
• When setting to “NORMAL”, [INPUT MODE FIXED] is set to “VARIABLE” and [INPUT MODE FIXED] is prohibited to 

select. (selection impossible.)

Option

“VARIABLE”, “FIXED”, “ACCTRL” or “AC/RCCTRL” (loop enabled)

Default VARIABLE
Function

     VARIABLE
     FIXED

     AC CTRL

     AC/RC CTRL

: If [INPUT MODE START] is set to Normal, input mode is not fixed.
: When “INPUT MODESTART” is active, it is impossible to switch to another channel or input 
  source.
: When “INPUT MODESTART” is active the unit starts at the input mode which is selected when 
  power is turned on in the case of the AC-ON only.
: When “INPUT MODESTART” is active the unit starts at the input mode which is selected 
  when power is turned on in any case.
  (AC

→ON, remote control→ON, main utit's key→ON)

Disabled key when 
setting to “FIXED” 

CHANNEL (+/-), DIRECT CHANNEL buttons, FLASHBACK, INPUT SELECT, TV/VIDEO, AUTO PRESET, 
MANUAL MEMORY, i.LINK, DIRECTINPUTSELECT, ATV, DTV, EPG, RADIO etc...

Remarks

• If [INPUT MODE START] is Normal, this function cannot be set.

Set to “VARIABLE” automatically.

• When setting to “FIXED”,

The item related to the channel setting and input selection in Menu are not displayed.
ON TIMER (Watching reservation) is not active.
* These items does not exist according to the model.

Option

“ON” or “OFF” (loop enabled)

Default ON
Function

     ON
     OFF

: The sound from the speakers is output.
: The sound from the speakers is not output even if the headphones are not used.

Remarks

• When the VOL (+/-) key is pressed, the mute icon is displayed for 4 seconds.
• For the MUTE key and sound-related keys, caution is displayed.
• For the headphones, normal operation is possible.

Option

“OFF”, “ON: TVRCE” or “ON: TVRCD” (loop enabled)

Default OFF
Function 

The item decide whether the signal received by the remote control’s light-receiving section is output to the blankpin (9pin) 
of RS232C.
     OFF
     ON: TVRCE
     ON: TVRCD 

: This function is not active.
: This function is active, and remote control is active, too.
: This function is active, but remote control is not active.

Exception

• In the case of “ON: TV RCD”, the start operation in the adjustment process mode, inspection mod are enabled 

                               regardless of this setting.

• In the case of “ON: TV RCD”, all the keys are enabled regardless of this setting while entering the adjustment process 

                               mode, inspection mode or Public mode setting screen.

Remarks 

* Remote control path through does not exist according to the model.

Option

“ENABLE” or “DISABLE” (loop enabled)

Default DISABLE
Function 

The item decide whether Power ON by the 232C command is enabled/disabled in the standby state.
The same function as 232C command “RSPW”.
     ENABLE
     DISABLE

: POWR0001 is always enabled.
: Start-up may be impossible at POWR0001.
  (If the 232C command reception module is set to OFF, the command is invalid.)